Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ROBBE 8427. We hope that this ROBBE 8427 user guide will be useful to you.
Lastmanuals help download the user guide ROBBE 8427.
Detailed instructions for use are in the User's Guide.
[. . . ] - Be sure to keep the cooling slots unobstructed to provide good air circulation - don't stand the charger on a carpet or felt surface. - Do not set up the charger and batteries on a flammable surface, and never leave the unit operating unsupervised. [. . . ] MANUAL MODE Before you can start the actual charge or discharge process, you have to set the battery type (NICD, NIMH or PB), the cell count, the battery capacity, the charge current and the discharge current. Up to ten such sets of parameters can be stored in spot memories 0 to 9 and called up at any time. The setup menu required for this appears immediately when you select manual mode. Note: you can only change values in the first line when the arrow symbol is flashing. TYPE NICD Selecting the spot memory: Select the MEMORY SELECT menu with the + button, confirm with ENTER, select the desired spot memory with the +/- buttons and confirm with ENTER. TYPE with the + button, select the type with ENTER. Set the cell count with the +/buttons and confirm with ENTER. ): same method as entering the cell count (PB: not available). At the EXIT menu point you can jump to the "AUTO / MANUAL" select option with the ENTER button; under SOUND press the ENTER button to activate or disable the buzzer. to initiate the charge or discharge process confirm the START menu point with the ENTER button. You can now press the MODE button to select CHARGE, DISCHARGE or DISC-CHAR. When you next connect the charger to its power supply, the unit automatically reverts to the spot memory you last used. Use the + / - buttons to change the current during charging or discharging. Spot memory, cell count, capacity, charge current and discharge current Error messages The following error messages can be erased by pressing any button once you have eliminated the problem. [. . . ] Don't end the charge or discharge process simply by disconnecting the battery pack; always stop the process by pressing the MODE button. 8415, the charger can also be operated from the 230 Volts mains supply, turning it into a universal 230 V AC and 12 V DC charger. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ROBBE 8427
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ROBBE 8427 will begin.
