User manual ROBLIN INSPIRATION

[. . . ] To ensure the safe operation of this cooker hood, we recommend that the hood should not be fitted below 65cm (for electric) or (70cm for gas) the measurements taken from the surface of the cooking appliance to the underside of the cooker hood. It is a possible fire risk if the hood is not sited as recommended. To ensure the best results, the cooking fumes should be able to rise naturally towards the inlet grilles on the underside of the cooker hood and the cooker hood should be positioned away from doors and windows, which will create turbulence. If the room where the hood is to be used contains a fuel-burning appliance such as a central heating boiler then its flue must be of the room sealed or balanced flue type. [. . . ] IN THE EXTRACTION MODE: a- Fit the non-return backflow flaps C over the round outlet item 6 on top of the canopy while pressing down until they snap into position, and then connect the ducting 150mm (6 INS) and secure the connections with appropriate clamping rings or adhesive tape (Fig. F- Place the canopy under the structure and fix it with the screws provided as illustrated in Fig. Attention: 2 persons are necessary to secure this operation. IN THE RECIRCULATION MODE: a- To carry out an inlet for recycling air in the kitchen (Fig. B- Connect the ducting 150mm (6 INS) not provided between motors item 6 and the recirculation spigot and secure the connections with appropriate clamping rings or adhesive tape (Fig. G- Place the canopy under the structure and fix it with the crews provided as illustrated in Fig. Attention: 2 persons are necessary to secure this operation. Function Display Turns the suction motor on and off at the last Displays the speed set speed used. Activates intensive speed from any other speed even with the motor off. This speed is timed to run for 10 minutes, after which the system returns to the previous speed. suitable to deal with maximum cooking fumes. Activates the motor at a speed that allows extraction of 100 m3/h for 10 minutes every hour, after which the motor stops. When the filter alarm is on, press the button for approximately 3 seconds to reset the alarm. These indications are only visible when the motor is turned off. Displays HI and the bottom right hand spot flashes once a second. Displays 24 and the bottom right hand spot flashes, while the motor is turned on On completing the procedure the previous indicator is turned off: FF indicates that the metal grease filters need washing. the alarm is triggered after the Hood has been in operation for 100 hours. EF indicates that the activated charcoal filter needs changing and the metal grease filters need washing. the alarm is triggered after the Hood has been in operation for 200 hours. Alternately displays the working speed and the time remaining before the hood turns off. Can be activated from any position, and is turned off by pressing the button or switching the motor off. To obtain the best performance we recommend you to switch `ON' the cooker hood a few minutes (in the boost setting) before you start cooking and you should leave it running for approximately 15 minutes after finishing. [. . . ] Proof of purchase will be required when requesting service. Therefore, please have your receipt available when requesting service as this constitutes the date from which your guarantee commenced. This Guarantee does not cover : - Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or filters or removable parts of glass or plastic. These items are considered to be consumable under the terms of this guarantee. [. . . ]