User manual ROBLIN PILOT OPTIMA AVEC MOTEUR DIMENSIONS

[. . . ] In the interest of continually improving our products, Olympus reserves the right to update or modify information contained in this manual. The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. Unless otherwise specified, the explanation about these illustrations is provided for VR-330/D-730. Step 1 Checking the contents of the box or Digital camera Strap LI-42B Lithium Ion Battery F-2AC USB-AC adapter USB cable AV cable Other accessories not shown: warranty card Contents may vary depending on purchase location. ROBLIN Setup CD-ROM Step 2 4 Preparing the Camera Step 3 5 Shooting and Playing Back Images "Preparing the Camera" (p. 12) "Shooting, Viewing, and Erasing" (p. [. . . ] Submenu 2 NTSC PAL Application Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on. Connecting the camera to a TV in European countries, China, and so on. The factory default settings differ according to the region where the camera is sold. To play back camera images on a TV 1 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]). 2 Connect the TV and camera. Multi-connector Connect to the TV video input jack (yellow) and audio input jack (white). AV cable (supplied) 3 Turn on the TV, and change "INPUT" to "VIDEO (an input jack connected to the camera). " For details on changing the input source of the TV, refer to the TV's instruction manual. 4 Press the q button, and use HI to select the image for playback. Depending on the TV's settings, the displayed images and information may become cropped. 46 EN For information on using the menus, see "Using the Menu" (p. 4). Saving battery power between shots [Power Save] s (Settings 2) Submenu 2 Off On X Y MD Time Power Save Application Date order 2011 . 26 12 : 30 Y/M/D Cancels [Power Save]. When the camera is not being used for approx. 10 seconds, the monitor automatically turns off to save battery power. Cancel MENU Set OK 2 Press the Q button to complete the operation. "Date, time, time zone, and language" (p. If [Standard] is selected in Steps 3 and 4, the image is printed at the printer's standard settings. 4/30 Submenu 5 Submenu 6 <× 0 to 10 Application This selects the number of prints. Selecting [With] prints the images with the date. Selecting [Without] prints the images without the date. Date With/Without NORM 14M 100 0004 '11/02/26 12:30 FILE File Name Single Print Print OK More Selecting [With] prints the file name on the image. With/Without Selecting [Without] does not print any file name on the image. (Proceeds to This selects a portion of the the setting image for printing. screen. ) 5 6 Use HI to select an image. Press F to make a print reservation for the current image. Press G to make the detailed printer settings for the current image. P 50 EN To crop an image [P] [P 1 Use the zoom lever to select the size of the cropping frame, use FGHI to move the frame, and then press the Q button. 9 Use FG to select [Print], and press the Q button. When [Option Set] is selected in [All Print] mode, [Print Info] screen is displayed. When printing is finished, the [Print Mode Select] screen is displayed. Print Mode Select Print All Print Multi Print All Index Print Order P Exit MENU Set OK Set OK 2 Use FG to select [OK], and press the Q button. To cancel printing OK Cancel Back MENU Set OK 1 When [Do Not Remove USB Cable] is displayed, press the m button, use FG to select [Cancel], and then press the Q button. 7 8 If necessary, repeat Steps 5 and 6 to select the image to be printed, make the detailed settings, and set [Single Print]. Press the Q button. Print Do Not Remove USB Cable Print Cancel MENU Continue Cancel Print Cancel Set OK Back MENU Set OK 10 Press the m button. 11 When the message [Remove USB Cable] is EN displayed, disconnect the USB cable from the camera and printer. 51 Print Reservations (DPOF *1) In print reservations, the number of prints and date imprint option are saved in the image on the card. [. . . ] Any defect that occurs due to exhausted batteries, etc. Any defect that occurs due to sand, mud, etc. entering the inside of the product casing. When this Warranty Certificate is not returned with the product. [. . . ]