User manual ROBLIN VIZIO VERRE 900 DIMENSIONS

[. . . ] For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. , declares that this VIZIO VERRE 900 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. De/ Italy: Use of the RLAN network is governed: ­ with respect to private use, by the Legislative Decree of 1. 105 indicates when free use is permitted; ­ with respect to the supply to the public of the RLAN access to telecom networks and services, by the Ministerial Decree 28. [. . . ] The talker's voice volume can be adjusted. Calling by phone number input 1 2 Press and rotate the control dial until "DIAL NUMBER" appears, then press it. Rotate the control dial to enter the phone number, and lastly select " " (space), then press the (handsfree) button*. Mic gain adjustment You can adjust the volume for the other party. For details on cellular phone operation, refer to your cellular phone manual. Depending on the cellular phone, handsfree connection may be cut off when call transfer is attempted. "RECEIVING" appears during transfer, then "COMPLETE" appears in the display of this unit when transfer is finished. Select a name in the internal phonebook or the call history that you want to delete, then press it. for details on how to access the name list in the internal phonebook , see page 24. Rotate the control dial until "DEL CONTACT" appears, then press it. You can transfer the phonebook data of a cellular phone into this unit. Check that the unit and cellular phone are connected beforehand. Store a voice tag on your cellular phone beforehand. If you activate voice dialing with a cellular phone connected to this unit, this function may not always work in some cases. Voice dialing may not work in some situations, depending on the effectiveness of the cellular phone's recognition function. For details, see the support site on the back cover. Tip Store voice tags while seated in the car, via this unit with "BT PHONE" source selected. While connecting a cellular phone to this unit, the SMS indicator informs you of any incoming or unread SMS messages. Adjusting the volume level The volume level is adjustable for any difference between the unit and the Bluetooth audio device. Even if the source is changed on this unit, playback of the audio device does not stop. Set your usual listening volume on the unit. Rotate the control dial until "BTA VOL" appears, and rotate the volume control dial to adjust the input level ("+18dB" ­ "0dB" ­ "­ 8dB"). [. . . ] ­ Make sure that the number you intend to store is correct (page 26). The unit starts searching for another frequency with the same PI (Program Identification) data ("PI SEEK" appears). Bluetooth phone source is selected without a cellular phone connected. A cellular phone has been disconnected during a call. [. . . ]