User manual ROCKTRON EGNATER

[. . . ] is properly adjusted and setup (follow all instructions). Extra care and caution should be taken to avoid tip over and injury. Unplug this apparatus during lightening storms or when unused during long periods of time. Refer all service to qualified service personnel. [. . . ] OPERATING TEMPERATURE Do not expose this unit to excessive heat. This unit is designed to operate between 32 F and 104 F (0 C and 40 C). This unit may not function properly under extreme temperatures. Introduction Congratulations on your purchase of the Rocktron X-Tune. The X-Tune provides easy tuning in a cool pedal format. A chromatic pedal tuner for guitar and bass, the X-Tune offers multi-LEDs and lighted notes that make it easy to tune on dark stages. Built in Rocktron's strong aluminum chassis, the X-Tune allows muting for silent tuning, and continuous out for live tuning. The X-Tune handles 12 Note tuning and a 7 octave range. Like most Rocktron pedals, the X-Tune features an easy access battery compartment. Add this tuner to your stomp box setup and stay in the pedal world Enjoy Connection 1- Continuous Tuning Connection 2 - MUTE Silent Tuning Connection 3- Continuous Tuning with another stomp box Connection 4 - MUTE Silent Tuning with another stomp box. Descriptions Descriptions 1 Note Indicator LEDs -These LEDs show the note being tuned. The note indicated above the LED (see point 2) is actual note being tuned. Notes - This row of notes will light up when the unit is turned on. The more "sharp" the note is, the faster the LED will flash. Tune the string down until the LED stops flashing and the "IN TUNE" LED lights. These letters indicate the notes in the standard tuning range for guitar. These notes will "light-up" when the X-Tune is turned on. . . this is ideal for tuning on dark or dimly lit stages. These LEDs will light depending on the note being played. These LEDs are indicator lights for the notes A, B, C, D, E, F, and G These LEDs will light depending on the note being played. These LEDs are indicator lights for Sharp notes or flat notes - A# or Bflat, C# or Dflat, D# or Eflat, F# or Gflat, or G# These dots are the note indicators for A# or Bflat, C# or Dflat, D# or Eflat, F# or Gflat, or G#. 2 3 4 5 6 7 Tuning Instuctions Step 1 - plug the guitar/bass into the tuner - see "connections" section. In the example on the following page we are tuning the low E string on a guitar or bass. Pluck your E string, and if needed, adjust your tuning machine on your instrument until the LED under note "E" is lit (indicated as 1 in the preceding diagram). Step 3 - if your note is flat - the "FLAT" LED will light and flash. The speed of the flash will show you by "how much" your string is flat. [. . . ] The speed of the flash will show you by "how much" your string is sharp. If the Sharp LED is flashing rapidly, tune your string down. During this process the LED will begin flashing slower. (Indicated as point 3 in the preceding diagram). [. . . ]