User manual ROLAND AF-70

[. . . ] This allows you to hear not only the content of the performance but also the playback environment--another unique advantage of the V-Piano Grand that benefits you even during rehearsals. 3 201b Before using this unit, carefully read the sections entitled: "IMPORTANT SAFETY INSTRUCTIONS, " "USING THE UNIT SAFELY" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner's manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Specifies the time signature. If you press the [F4 (OK)] button the previously recorded performance will be erased. If you don't want to erase the previously recorded performance, press the [F1 (CANCEL)] button to return to the previous screen, and save your performance (p. When you've finished making metronome settings, press the [Exit] button to return to the song screen. 6. In the song screen, turn Function on, press the [F1 (TEMPO)] button, and turn the [Value] dial to adjust the metronome tempo. 8. Begin playing from recording-standby mode or press the [F3 (REC START)] button to start the recording. Now you're ready to record. 7. In the song screen, turn Function off, and press the [F4 (REC)] button. To exit recording-standby mode and stop, press the [F4 (REC)] button. 9. When you're finished recording, press the [F3 (STOP)] button. The display will indicate "Save Song?" 10. Press the [F4 (SAVE)] button to save the song. If you decide to cancel without saving, press [F1 (CANCEL)]. 53 Playing Songs and Recording Your Performances 5. When you've finished entering the file name, press the Saving Your Recorded Performance The performance you recorded will be erased when you power-off the V-Piano Grand. If you want to keep your performance, save it to a file as described below. Save format SMF (Format 0) [F4 (EXECUTE)] button to start saving the song. The screen will indicate "Executing. . . " while the data is being saved. Never turn off the power while this indication is shown. Use the [F3 ()] / [F4 ()] buttons or the [Value] dial to select a group. fig. Util02. eps 1. From the Tone screen, press the [Function] button to turn Function on. The [Function] button will light when the function is on. 2. Press the [F4 (UTILITY)] button to access the Utility screen. 3. Use the [F3 ()] or [F4 ()] buttons to select "1. Press the [Enter] button or the [F1 (ENTER)] button to see the parameters in that group. 5. Use the [F3 ()] / [F4 ()] buttons to select a parameter within the group. fig. Util03. eps 4. Press the [Enter] button or the [F1 (ENTER)] button to access the system setting screen. 6. Turn the [Value] dial to adjust the value. You can press the [F2 (RESET)] button to return to the initial value. 5. Press the [Write] button. Simply changing a value does not cause the change to be memorized. You must execute the Write operation to store your change in the appropriate memory location for that parameter. Refer to "Parameters That Can Be Set" (p. [. . . ] 411, Nirman Kendra Mahalaxmi Flats Compound . Edwin Moses Road, Mumbai-400011, INDIA TEL: (022) 2493 9051 U. Eastern Avenue Los Angeles, CA 90040-2938, U. TEL: (323) 890 3700 CHILE Comercial Fancy II S. A. [. . . ]