Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ROLAND AT-30R. We hope that this ROLAND AT-30R user guide will be useful to you.
Lastmanuals help download the user guide ROLAND AT-30R.
You may also download the following manuals related to this product:
ROLAND AT-30R MIDI IMPLEMENTATION (275 ko)
ROLAND AT-30R V1.01 MIDI IMPLEMENTATION (297 ko)
Manual abstract: user guide ROLAND AT-30R
Detailed instructions for use are in the User's Guide.
[. . . ] (Initial value is ON) Not Recieved in Keyboard Part.
n = MIDI channel number : 0H-FH (ch. 1-ch. 16) kk = note number : 00H-7FH (0-127) vv = note on velocity : 01H-7FH (1-127) * * Not received when Rx. NOTE MESSAGE = OFF. (Initial value is ON) For Drum Parts, not received when Rx. NOTE ON = OFF for each Instrument.
Pan (Controller number 10)
Status BnH 2nd bytes 0AH 3rd byte vvH
qPolyphonic Key Pressure
Status AnH 2nd bytes kkH 3rd byte vvH
n = MIDI channel number : 0H-FH (ch. 1-ch. 16) vv = pan : 00H-40H-7FH (Left-Center-Right), Initial Value = 40H (Center) * * * For Rhythm Parts, this is a relative adjustment of each Instrument's pan setting. (Initial value is ON) Not Recieved in Keyboard Part.
n = MIDI channel number : 0H-FH (ch. 1-ch. 16) kk = note number : 00H-7FH (0-127) vv = key pressure : 00H-7FH (0-127) * * * Not received when Rx. POLY PRESSURE (PAf) = OFF. (Initial value is ON) The resulting effect is determined by System Exclusive messages. [. . . ] For compatibility with other GS models, it is recommended that the maximum polyphony be equal or less than 24. 40 01 30 00: Room 1 04 Hall 2 01: Room 2 02: Room 3 03: Hall 1 04: Hall 2 05: Plate 06: Delay 07: Panning Delay 40 01 31 00 00 01 00-07 REVERB CHARACTER 0-7 04 4 40 01 32 00 00 01 00-07 REVERB PRE-LPF 0-7 00 0 40 01 33 00 00 01 00-7F REVERB LEVEL 0-127 40 64 40 01 34 00 00 01 00-7F REVERB TIME 0-127 40 64 40 01 35 00 00 01 00-7F REVERB DELAY FEEDBACK 0-127 00 0 * REVERB MACRO is a macro parameter that allows global setting of reverb parameters. When you select the reverb type with REVERB MACRO, each reverb parameter will be set to the most suitable value. * REVERB CHARACTER is a parameter that changes the reverb algorithm. The value of REVERB CHARACTER corresponds to the REVERB MACRO of the same number. 40 01 38 00: Chorus 1 02 Chorus 3 01: Chorus 2 02: Chorus 3 03: Chorus 4 04: Feedback Chorus 05: Flanger 06: Short Delay 07: Short Delay (FB) 40 01 39 00 00 01 00-07 CHORUS PRE-LPF 0-7 00 0 40 01 3A 00 00 01 00-7F CHORUS LEVEL 0-127 40 64 40 01 3B 00 00 01 00-7F CHORUS FEEDBACK 0-127 08 8 40 01 3C 00 00 01 00-7F CHORUS DELAY 0-127 50 80 40 01 3D 00 00 01 00-7F CHORUS RATE 0-127 03 3 40 01 3E 00 00 01 00-7F CHORUS DEPTH 0-127 13 19 40 01 3F 00 00 01 00-7F CHORUS SEND LEVEL TO REVERB 0-127 00 0 * CHORUS MACRO is a macro parameter that allows global setting of chorus parameters. When you use CHORUS MACRO to select the chorus type, each chorus parameter will be set to the most suitable value. 00 00 01 00-07 CHORUS MACRO 00 00 01 00-07 REVERB MACRO
9
AT-20R/30R MIDI IMPLEMENTATION
qPart Parameters (GS Part: Model ID = 42H)
AT-20R/30R has 16 parts. Parameters that can be set individually for each Part are called Part parameters. If you use exclusive messages to set Part parameters, specify the address by Block number rather than Part Number (normally the same number as the MIDI channel). The Block number can be specified as one of 16 blocks, from 0 (H) to F (H). 40 1x 24 00 00 01 00-01 Rx. BANK SELECT LSB * AT-20R/30R can be recognise Bank Select LSB (40H-43H) even if this message is OFF. OFF/ON 00
ON (OFF*)
OFF
10
AT-20R/30R MIDI IMPLEMENTATION
40 1x 25 40 1x 28 40 1x 29# 40 1x 30 40 1x 31 40 1x 32 40 1x 33 40 1x 34 40 1x 35 40 1x 36 40 1x 37
00 00 01 00 00 03
00-01 00-7F
TONE REMAIN Bank Select LSB Range
OFF/ON LSB (from) LSB (to) -50 - +50 -50 - +50 -50 - +50 -50 - +50 -50 - +50 -50 - +50 -50 - +50 -50 - +50
01 40 43 40 40 40 40 40 40 40 40
ON 40H 43H 0 0 0 0 0 0 0 0
00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01
0E-72 0E-72 0E-72 0E-72 0E-72 0E-72 0E-72 0E-72
TONE MODIFY 1 Vibrato rate (= NRPN# 8) TONE MODIFY 2 Vibrato depth (= NRPN# 9) TONE MODIFY 3 TVF cutoff frequency (= NRPN# 32) TONE MODIFY 4 TVF resonance (= NRPN# 33) TONE MODIFY 5 TVF&TVA Env. attack (= NRPN# 99) TONE MODIFY 6 TVF&TVA Env. decay (= NRPN# 100) TONE MODIFY 7 TVF&TVA Env. release (= NRPN# 102) TONE MODIFY 8 Vibrato delay (= NRPN# 10)
40 1x 40 00 00 0C 00-7F SCALE TUNING C -64 - +63 [cent] 40 0 [cent] 40 1x 41# 00-7F SCALE TUNING C# -64 - +63 [cent] 40 0 [cent] 40 1x 42# 00-7F SCALE TUNING D -64 - +63 [cent] 40 0 [cent] 40 1x 43# 00-7F SCALE TUNING D# -64 - +63 [cent] 40 0 [cent] 40 1x 44# 00-7F SCALE TUNING E -64 - +63 [cent] 40 0 [cent] 40 1x 45# 00-7F SCALE TUNING F -64 - +63 [cent] 40 0 [cent] 40 1x 46# 00-7F SCALE TUNING F# -64 - +63 [cent] 40 0 [cent] 40 1x 47# 00-7F SCALE TUNING G -64 - +63 [cent] 40 0 [cent] 40 1x 48# 00-7F SCALE TUNING G# -64 - +63 [cent] 40 0 [cent] 40 1x 49# 00-7F SCALE TUNING A -64 - +63 [cent] 40 0 [cent] 40 1x 4A# 00-7F SCALE TUNING A# -64 - +63 [cent] 40 0 [cent] 40 1x 4B# 00-7F SCALE TUNING B -64 - +63 [cent] 40 0 [cent] * SCALE TUNING is a function that allows fine adjustment to the pitch of each note in the octave. The pitch of each identically-named note in all octaves will change simultaneously. A setting of ± 0 cent (40H) is equal temperament. Supplementary material, "The Scale Tune Feature"(p. 40 2x 00 40 2x 01 40 2x 02 40 2x 03 40 2x 04 40 2x 05 40 2x 06 40 2x 07 40 2x 08 40 2x 09 40 2x 0A 40 2x 10 40 2x 11 40 2x 12 40 2x 13 40 2x 14 40 2x 15 40 2x 16 40 2x 17 40 2x 18 40 2x 19 40 2x 1A 40 2x 20 40 2x 21 40 2x 22 40 2x 23 40 2x 24 40 2x 25 40 2x 26 40 2x 27 40 2x 28 40 2x 29 40 2x 2A 40 2x 30 40 2x 31 40 2x 32 40 2x 33 40 2x 34 40 2x 35 40 2x 36 40 2x 37 40 2x 38 40 2x 39 40 2x 3A 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 40-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F MOD PITCH CONTROLMOD TVF CUTOFF CONTROL MOD AMPLITUDE CONTROL MOD LFO1 RATE CONTROL MOD LFO1 PITCH DEPTH0 MOD LFO1 TVF DEPTH MOD LFO1 TVA DEPTH MOD LFO2 RATE CONTROL MOD LFO2 PITCH DEPTH MOD LFO2 TVF DEPTH MOD LFO2 TVA DEPTH BEND PITCH CONTROL BEND TVF CUTOFF CONTROL BEND AMPLITUDE CONTROL BEND LFO1 RATE CONTROL BEND LFO1 PITCH DEPTH BEND LFO1 TVF DEPTH BEND LFO1 TVA DEPTH BEND LFO2 RATE CONTROL BEND LFO2 PITCH DEPTH BEND LFO2 TVF DEPTH BEND LFO2 TVA DEPTH CAf PITCH CONTROL CAf TVF CUTOFF CONTROL CAf AMPLITUDE CONTROL CAf LFO1 RATE CONTROL CAf LFO1 PITCH DEPTH CAf LFO1 TVF DEPTH CAf LFO1 TVA DEPTH CAf LFO2 RATE CONTROL CAf LFO2 PITCH DEPTH CAf LFO2 TVF DEPTH CAf LFO2 TVA DEPTH PAf PITCH CONTROL PAf TVF CUTOFF CONTROL PAf AMPLITUDE CONTROL PAf LFO1 RATE CONTROL PAf LFO1 PITCH DEPTH PAf LFO1 TVF DEPTH PAf LFO1 TVA DEPTH PAf LFO2 RATE CONTROL PAf LFO2 PITCH DEPTH PAf LFO2 TVF DEPTH PAf LFO2 TVA DEPTH 24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] -600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] 0-24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] 40 40 40 40 0A 00 00 40 00 00 00 42 40 40 40 00 00 00 40 00 00 00 40 40 40 40 00 00 00 40 00 00 00 40 40 40 40 00 00 00 40 00 00 00 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 47 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 2 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%]
11
AT-20R/30R MIDI IMPLEMENTATION
40 2x 40 40 2x 41 40 2x 42 40 2x 43 40 2x 44 40 2x 45 40 2x 46 40 2x 47 40 2x 48 40 2x 49 40 2x 4A 40 2x 50 40 2x 51 40 2x 52 40 2x 53 40 2x 54 40 2x 55 40 2x 56 40 2x 57 40 2x 58 40 2x 59 40 2x 5A
00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01
28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F
CC1 PITCH CONTROL CC1 TVF CUTOFF CONTROL CC1 AMPLITUDE CONTROL CC1 LFO1 RATE CONTROL CC1 LFO1 PITCH DEPTH CC1 LFO1 TVF DEPTH CC1 LFO1 TVA DEPTH CC1 LFO2 RATE CONTROL CC1 LFO2 PITCH DEPTH CC1 LFO2 TVF DEPTH CC1 LFO2 TVA DEPTH CC2 PITCH CONTROL CC2 TVF CUTOFF CONTROL CC2 AMPLITUDE CONTROL CC2 LFO1 RATE CONTROL CC2 LFO1 PITCH DEPTH CC2 LFO1 TVF DEPTH CC2 LFO1 TVA DEPTH CC2 LFO2 RATE CONTROL CC2 LFO2 PITCH DEPTH CC2 LFO2 TVF DEPTH CC2 LFO2 TVA DEPTH
-24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%]
40 40 40 40 00 00 00 40 00 00 00 40 40 40 40 00 00 00 40 00 00 00
0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%]
qDrum Setup Parameters (GS Part: Model ID = 42H)
* * m: Map number (0 = MAP1, 1 = MAP2) rr: drum part note number (00H-7FH) Size (H) 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 Data (H) 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-01 00-01 Parameter PLAY NOTE NUMBER LEVEL (= NRPN# 26) ASSIGN GROUP NUMBER PANPOT (= NRPN# 28, except RANDOM) REVERB SEND LEVEL0 (= NRPN# 29) CHORUS SEND LEVEL (= NRPN# 30) Rx. NOTE ON Description Pitch coarse TVA level Non, 1-127 -64 (RANDOM), -63 (LEFT) - +63 (RIGHT) . 0-1. 0 Multiplicand of the part reverb depth 0. 0-1. 0 Multiplicand of the part chorus depth OFF/ON OFF/ON
Address (H) 41 m1 rr 41 m2 rr 41 m3 rr 41 m4 rr 41 m5 rr 41 m6 rr 41 m7 rr 41 m8 rr *
When the Drum Set is changed, DRUM SETUP PARAMETER values will all be initialized.
12
AT-20R/30R MIDI IMPLEMENTATION
4. Supplementary material
qDecimal and Hexadecimal table
In MIDI documentation, data values and addresses/sizes of exclusive messages etc. are expressed as hexadecimal values for each 7 bits. The following table shows how these correspond to decimal numbers. +------------+------------++------------+------------++------------+------------++------------+------------+ | Dec. [. . . ] Bs String Bass Bass+Cymbal Contrabass1 E. Bass1 E. Bass2 Tuba Synth. Bass1 Voice Thum Number of Voice 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 2 3 2 2 1 1 1 1 2 2 1 1 2 1 1 1 1 2 2 2 3 2 4 2 2 2 2 3 1 No. K32 K41 K42 L11 L21 M11 M21 M31 M41 N11 N12 N21 N31 O11 O12 O13 O21 O22 O31 O41 P11 P21 P31 P41 Q11 Q21 Q31 Q41 Q51 Q61 Q71 R11 R22 R31 R32 R41 R51 S11 S12 T11 T12 T21 T31 T32 T41 T51 T52 T61 T71 T81
15
AT-20R/30R MIDI IMPLEMENTATION
qAT-30R Keyboard Part Tone List
CC0 /CC32 / PC CC0 /CC32 / PC 00h / 00h / 00h 00h / 00h / 02h 00h / 00h / 04h 00h / 00h / 01h 00h / 00h / 03h 00h / 00h / 05h 00h / 00h / 20h 00h / 00h / 06h 00h / 00h / 08h 00h / 00h / 0Ah 00h / 00h / 07h 00h / 00h / 09h 00h / 00h / 0Bh 00h / 00h / 0Ch 00h / 00h / 0Dh 00h / 00h / 0Eh 00h / 00h / 10h 00h / 00h / 12h 00h / 00h / 0Fh 00h / 00h / 11h 00h / 00h / 13h 00h / 00h / 14h 00h / 00h / 16h 00h / 00h / 18h 00h / 00h / 15h 00h / 00h / 17h 00h / 00h / 19h 00h / 00h / 21h 02h / 00h / 14h 01h / 00h / 14h 00h / 00h / 1Ah 00h / 00h / 1Ch 00h / 00h / 1Eh 00h / 00h / 1Bh 00h / 00h / 1Dh 00h / 00h / 1Fh 00h / 00h / 22h 00h / 00h / 23h 00h / 00h / 24h 00h / 00h / 25h 00h / 00h / 26h 00h / 00h / 27h 00h / 00h / 28h 00h / 00h / 29h 00h / 00h / 2Ah 00h / 00h / 2Bh 00h / 00h / 2Ch 00h / 00h / 2Dh 00h / 00h / 35h 00h / 00h / 2Eh 00h / 00h / 2Fh 00h / 00h / 5Ch 00h / 00h / 66h 00h / 00h / 5Dh 00h / 00h / 37h 01h / 00h / 31h 00h / 00h / 31h Tone Name Full Organ1 Full Organ2 Full Organ3 Full Organ4 Full Organ5 Full Organ6 Full Organ7 Jazz Organ1 Jazz Organ2 Jazz Organ3 Jazz Organ4 Jazz Organ5 Jazz Organ6 Rock Organ1 Rock Organ2 Lower Organ1 Lower Organ2 Lower Organ3 Lower Organ4 Lower Organ5 Lower Organ6 Pipe Organ1 Pipe Organ2 Pipe Organ3 Pipe Organ4 Pipe Organ5 Pipe Organ6 Pipe Organ7 Diapason8' FluteCeleste Theater Or. 1 Theater Or. 2 Theater Or. 3 Theater Or. 4 Theater Or. 5 Theater Or. 6 Theater Or. 7 Synth. Organ3 Strings1 Strings2 Slow Str. 1 Slow Str. 2 Synth. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ROLAND AT-30R
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ROLAND AT-30R will begin.