User manual ROLAND AT-60 V1.00 MIDI IMPLEMENTATION

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ROLAND AT-60. We hope that this ROLAND AT-60 user guide will be useful to you.
Lastmanuals help download the user guide ROLAND AT-60.
Download
Manual abstract: user guide ROLAND AT-60V1.00 MIDI IMPLEMENTATION
Detailed instructions for use are in the User's Guide.
 [. . . ] MIDI IMPLEMENTATION
Model: AT-S Series Date: May. 8,  2002 Version: 1. 00

Portamento Time (Controller number 5)
Status BnH 2nd bytes 05H 3rd byte vvH

1. Receive data
Channel Voice Messages
Note off
Status 8nH 9nH 2nd byte kkH kkH 3rd byte vvH 00H

n = MIDI channel number: vv = Portamento Time: *

0H-FH (ch. 1-ch. 16) 00H-7FH (0-127),  Initial value = 00H (0)

This adjusts the rate of pitch change when Portamento is ON or when using the Portamento Control. A value of 0 results in the fastest change. 

Data Entry (Controller number 6,  38)
Status BnH BnH 2nd bytes 06H 26H 3rd byte mmH llH

n = MIDI channel number: kk = note number: vv = note off velocity: * *

0H-FH (ch. 1-ch. 16) 00H-7FH (0-127) 00H-7FH (0-127)

For Drum Parts,  these messages are received when Rx. NOTE OFF = ON for each Instrument.  [. . . ] When you use CHORUS MACRO to select the chorus type,  each chorus parameter will be set to the most suitable value. 

Part Parameters [Model ID = 42H]
AT-S has 16 parts. Parameters that can be set individually for each Part are called Part parameters. If you use exclusive messages to set Part parameters,  specify the address by Block number rather than Part Number (normally the same number as the MIDI channel). The Block number can be specified as one of 16 blocks,  from 0 (H) to F (H). The relation between Part number and Block number is as follows. x. . . BLOCK NUMBER (0-F), Part 1 (MIDI ch = 1) x = 1 Part 2 (MIDI ch = 2) x = 2 ::: Part 9 (MIDI ch = 9) x = 9 Part10 (MIDI ch = 10) x = 0 Part11 (MIDI ch = 11) x = A Part12 (MIDI ch = 12) x = B ::: Part16 (MIDI ch = 16) x = F Address (H) 40 1x 00 40 1x 01# 40 1x 02 40 1x 03 40 1x 04 40 1x 05 40 1x 06 40 1x 07 40 1x 08 40 1x 09 40 1x 0A Size (H) 00 00 02 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 Data (H) 00-7F 00-7F 00-10 00-01 00-01 00-01 00-01 00-01 00-01 00-01 00-01 Parameter TONE NUMBER Rx. VALUE 1-128 1-16,  OFF OFF/ON OFF/ON OFF/ON OFF/ON OFF/ON OFF/ON OFF/ON OFF/ON Default Value (H) 00 00 Same as the Part Number 01 01 01 01 01 01 01 00 (01*) Description 0 1 ON ON ON ON ON ON ON OFF (ON*)

Rx. NRPN is set to OFF by power-on or by receiving "Turn General MIDI System On, " and it will be set ON when "GS RESET" is received. 40 1x 0B 40 1x 0C 40 1x 0D 40 1x 0E 40 1x 0F 40 1x 10 40 1x 11 40 1x 12 40 1x 13 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00-01 00-01 00-01 00-01 00-01 00-01 00-01 00-01 00-01 Rx. SOFT MONO/POLY MODE (= CC# 126 01 / CC# 127 00) USE FOR RHYTHM PART 1 = MAP1 2 = MAP2 OFF/ON OFF/ON OFF/ON OFF/ON OFF/ON OFF/ON OFF/ON OFF/ON Mono/Poly 01 01 01 01 01 01 01 01 01 ON ON ON ON ON ON ON ON Poly

40 1x 15

00 00 01

00-02

0 = OFF 01 at x = 0

00 at x  0 MAP1 at x = 0

OFF at x  0

9

MIDI IMPLEMENTATION
This parameter sets the Drum Map of the Part used as the Drum Part. AT-S can simultaneously (in different Parts) use up to two Drum Maps (MAP1,  MAP2). With the initial settings,  Part10 (MIDI CH = 10,  x = 0) is set to MAP1 (1),  and other Parts are set to normal instrumental Parts (OFF (0)). 40 1x 16 40 1x 17 40 1x 18# 00 00 01 00 00 02 28-58 08-F8 PITCH KEY SHIFT PITCH OFFSET FINE Use nibblized data. -24 - +24 [semitones] -12. 0 - +12. 0 [Hz] 40 08 00 0 [semitones] 0 [Hz]

PITCH OFFSET FINE allows you to alter,  by a specified frequency amount,  the pitch at which notes will sound. This parameter differs from the conventional Fine Tuning (RPN #1) parameter in that the amount of frequency alteration (in Hertz) will be identical no matter which note is played. When a multiple number of Parts,  each of which has been given a different setting for PITCH OFFSET FINE,  are sounded by means of an identical note number,  you can obtain a Celeste effect. 40 1x 19 40 1x 1A 40 1x 1B 40 1x 1C 40 1x 1D 40 1x 1E 40 1x 1F 40 1x 20 40 1x 21 40 1x 22 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-5F 00-5F 00-7F 00-7F PART LEVEL (= CC# 7) VELOCITY SENSE DEPTH VELOCITY SENSE OFFSET PART PANPOT (= CC# 10,  except RANDOM) KEY RANGE LOW KEY RANGE HIGH CC1 CONTROLLER NUMBER CC2 CONTROLLER NUMBER CHORUS SEND LEVEL (= CC# 93) REVERB SEND LEVEL (= CC# 91) TONE MODIFY 1 Vibrato rate (= NRPN# 8) TONE MODIFY 2 Vibrato depth (= NRPN# 9) TONE MODIFY 3 TVF cutoff frequency (= NRPN# 32) TONE MODIFY 4 TVF resonance (= NRPN# 33) TONE MODIFY 5 TVF&TVA Env. attack (= NRPN# 99) TONE MODIFY 6 TVF&TVA Env. decay (= NRPN# 100) TONE MODIFY 7 TVF&TVA Env. release (= NRPN# 102) TONE MODIFY 8 Vibrato delay (= NRPN# 10) SCALE TUNING C SCALE TUNING C# SCALE TUNING D SCALE TUNING D# SCALE TUNING E SCALE TUNING F SCALE TUNING F# SCALE TUNING G SCALE TUNING G# SCALE TUNING A SCALE TUNING A# SCALE TUNING B 0-127 0-127 0-127 -64 (RANDOM),  -63 (LEFT) - +63 (RIGHT) (C-1)-(G9) (C-1)-(G9) 0-95 0-95 0-127 0-127 64 40 40 40 00 7F 10 11 00 28 100 64 64 0 (CENTER) C-1 G9 16 17 0 40

40 1x 30 40 1x 31 40 1x 32 40 1x 33 40 1x 34 40 1x 35 40 1x 36 40 1x 37

00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01

0E-72 0E-72 0E-72 0E-72 0E-72 0E-72 0E-72 0E-72

-50 - +50 -50 - +50 -50 - +50 -50 - +50 -50 - +50 -50 - +50 -50 - +50 -50 - +50

40 40 40 40 40 40 40 40

0 0 0 0 0 0 0 0

40 1x 40 40 1x 41# 40 1x 42# 40 1x 43# 40 1x 44# 40 1x 45# 40 1x 46# 40 1x 47# 40 1x 48# 40 1x 49# 40 1x 4A# 40 1x 4B# *

00 00 0C

00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F

-64 - +63 [cent] -64 - +63 [cent] -64 - +63 [cent] -64 - +63 [cent] -64 - +63 [cent] -64 - +63 [cent] -64 - +63 [cent] -64 - +63 [cent] -64 - +63 [cent] -64 - +63 [cent] -64 - +63 [cent] -64 - +63 [cent]

40 40 40 40 40 40 40 40 40 40 40 40

0 [cent] 0 [cent] 0 [cent] 0 [cent] 0 [cent] 0 [cent] 0 [cent] 0 [cent] 0 [cent] 0 [cent] 0 [cent] 0 [cent]

SCALE TUNING is a function that allows fine adjustment to the pitch of each note in the octave. The pitch of each identically-named note in all octaves will change simultaneously. A setting of A?0 cent (40H) is equal temperament. Supplementary material,  "The Scale Tune Feature" (p. 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 40-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F MOD PITCH CONTROL MOD TVF CUTOFF CONTROL MOD AMPLITUDE CONTROL MOD LFO1 RATE CONTROL MOD LFO1 PITCH DEPTH MOD LFO1 TVF DEPTH MOD LFO1 TVA DEPTH MOD LFO2 RATE CONTROL MOD LFO2 PITCH DEPTH MOD LFO2 TVF DEPTH MOD LFO2 TVA DEPTH BEND PITCH CONTROL BEND TVF CUTOFF CONTROL BEND AMPLITUDE CONTROL BEND LFO1 RATE CONTROL BEND LFO1 PITCH DEPTH BEND LFO1 TVF DEPTH BEND LFO1 TVA DEPTH BEND LFO2 RATE CONTROL -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] 0-24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 40 40 40 40 0A 00 00 40 00 00 00 42 40 40 40 00 00 00 40 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 47 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 2 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz]

40 2x 00 40 2x 01 40 2x 02 40 2x 03 40 2x 04 40 2x 05 40 2x 06 40 2x 07 40 2x 08 40 2x 09 40 2x 0A 40 2x 10 40 2x 11 40 2x 12 40 2x 13 40 2x 14 40 2x 15 40 2x 16 40 2x 17

10

MIDI IMPLEMENTATION
40 2x 18 40 2x 19 40 2x 1A 40 2x 20 40 2x 21 40 2x 22 40 2x 23 40 2x 24 40 2x 25 40 2x 26 40 2x 27 40 2x 28 40 2x 29 40 2x 2A 40 2x 30 40 2x 31 40 2x 32 40 2x 33 40 2x 34 40 2x 35 40 2x 36 40 2x 37 40 2x 38 40 2x 39 40 2x 3A 40 2x 40 40 2x 41 40 2x 42 40 2x 43 40 2x 44 40 2x 45 40 2x 46 40 2x 47 40 2x 48 40 2x 49 40 2x 4A 40 2x 50 40 2x 51 40 2x 52 40 2x 53 40 2x 54 40 2x 55 40 2x 56 40 2x 57 40 2x 58 40 2x 59 40 2x 5A 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00-7F 00-7F 00-7F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F BEND LFO2 PITCH DEPTH BEND LFO2 TVF DEPTH BEND LFO2 TVA DEPTH CAf PITCH CONTROL CAf TVF CUTOFF CONTROL CAf AMPLITUDE CONTROL CAf LFO1 RATE CONTROL CAf LFO1 PITCH DEPTH CAf LFO1 TVF DEPTH CAf LFO1 TVA DEPTH CAf LFO2 RATE CONTROL CAf LFO2 PITCH DEPTH CAf LFO2 TVF DEPTH CAf LFO2 TVA DEPTH PAf PITCH CONTROL PAf TVF CUTOFF CONTROL PAf AMPLITUDE CONTROL PAf LFO1 RATE CONTROL PAf LFO1 PITCH DEPTH PAf LFO1 TVF DEPTH PAf LFO1 TVA DEPTH PAf LFO2 RATE CONTROL PAf LFO2 PITCH DEPTH PAf LFO2 TVF DEPTH PAf LFO2 TVA DEPTH CC1 PITCH CONTROL CC1 TVF CUTOFF CONTROL CC1 AMPLITUDE CONTROL CC1 LFO1 RATE CONTROL CC1 LFO1 PITCH DEPTH CC1 LFO1 TVF DEPTH CC1 LFO1 TVA DEPTH CC1 LFO2 RATE CONTROL CC1 LFO2 PITCH DEPTH CC1 LFO2 TVF DEPTH CC1 LFO2 TVA DEPTH CC2 PITCH CONTROL CC2 TVF CUTOFF CONTROL CC2 AMPLITUDE CONTROL CC2 LFO1 RATE CONTROL CC2 LFO1 PITCH DEPTH CC2 LFO1 TVF DEPTH CC2 LFO1 TVA DEPTH CC2 LFO2 RATE CONTROL CC2 LFO2 PITCH DEPTH CC2 LFO2 TVF DEPTH CC2 LFO2 TVA DEPTH 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] 00 00 00 40 40 40 40 00 00 00 40 00 00 00 40 40 40 40 00 00 00 40 00 00 00 40 40 40 40 00 00 00 40 00 00 00 40 40 40 40 00 00 00 40 00 00 00 0 [cent] 0 [cent] 0 [%] 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%]

Drum Setup Parameters [Model ID = 42H]
m: Map number (0 = MAP1,  1 = MAP2) rr: drum part note number (00H-7FH) Address (H) 41 m1 rr 41 m2 rr 41 m3 rr 41 m4 rr 41 m5 rr 41 m6 rr 41 m7 rr 41 m8 rr * Size (H) 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 Data (H) 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-01 00-01 Parameter PLAY NOTE NUMBER LEVEL (= NRPN# 26) ASSIGN GROUP NUMBER PANPOT (= NRPN# 28,  except RANDOM) REVERB SEND LEVEL (= NRPN# 29) CHORUS SEND LEVEL (= NRPN# 30) Rx. NOTE ON Description Pitch coarse TVA level Non,  1-127 -64 (RANDOM),  -63 (LEFT) - +63 (RIGHT) 0. 0-1. 0 Multiplicand of the part reverb depth 0. 0-1. 0 Multiplicand of the part chorus depth OFF/ON OFF/ON

When the Drum Set is changed,  DRUM SETUP PARAMETER values will all be initialized. 

11

MIDI IMPLEMENTATION 4.  [. . . ] Bs Theater Bass Bombarde String Bass Bass+Cymbal String Bass2 Str. Bass Pdl Str. BassSolo Baby Bass Contrabass1 Contrabass2 AEx Bs+Timp E. Bass1 E. Bass2 E. Bass3 E. Bass4 E. Bass5 Tuba Tuba2 Tuba3 Synth. Bass2 Voice Thum T81 T71 T61 T51 T52 T41 T42 T31 T32 T11 T12 T21 O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O CC0/CC32/PC 00h/00h/00h 00h/41h/00h 00h/47h/00h 00h/48h/00h 08h/00h/00h 10h/00h/00h 00h/00h/01h 00h/40h/01h 00h/41h/01h 00h/48h/01h 08h/00h/01h 00h/00h/02h 00h/41h/02h 00h/42h/02h 00h/43h/02h 00h/48h/03h 08h/00h/02h 08h/40h/02h 08h/41h/02h 08h/42h/02h 00h/00h/03h 00h/40h/03h 00h/48h/03h 08h/00h/03h 00h/00h/04h 00h/41h/04h 00h/42h/04h 00h/48h/04h 08h/00h/04h 08h/40h/04h 08h/41h/04h 08h/42h/04h 10h/00h/04h 10h/40h/04h 10h/41h/04h 10h/42h/04h 10h/43h/04h 18h/00h/04h 18h/40h/04h 18h/41h/04h 18h/42h/04h 18h/48h/04h 00h/00h/05h 00h/40h/05h 00h/41h/05h 00h/42h/05h 00h/43h/05h 00h/48h/05h 08h/00h/05h 08h/40h/05h 08h/41h/05h 08h/42h/05h 08h/43h/05h 10h/00h/05h 10h/42h/05h 00h/00h/06h 00h/40h/06h 00h/41h/06h 00h/48h/06h 08h/00h/06h 08h/40h/06h 08h/41h/06h 10h/00h/06h 18h/00h/06h 00h/00h/07h 00h/40h/07h Tone Name Grand Piano1 MIDI Piano1 Piano Choir Piano 1* Piano 1w Piano 1d Piano 2 Grand Piano2 MIDI Piano2 Piano 2* Piano 2w Piano 3 EG+Rhodes 1 EG+Rhodes 2 Bell Piano Piano 3* Piano 3w Rock Piano Air Grand PianoStrings GS Honkytonk Honky-tonk 1 Honky-tonk* Honky-tonk 2 GS E. Piano1 Hard Rhodes Stage Rhodes E. Piano 1* Detuned EP 1 Soft E. Piano Detuned EP 1 Chord EP1 E. Piano 1v E. Piano 1 Dyno Rhodes* Suitcase Dyno Rhodes 60's E. Piano Sine Rhodes Wurly Dist E. Piano 60'sE. Piano* GS E. Piano2 Hard E. Piano E. Piano 3 E. Piano 2 EP Phase E. Piano 2* Detuned EP 2 St. FM EP FM+SA EP Hard FM EP MellowRhodes E. Piano 2v EP Legend GS Harpsi. Harpsi. Singl Harpsichord Harpsichord* Coupled Hps. Harpsi. Doubl Synth Harpsi Harpsi. w Harpsi. o Soft Clav.  [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ROLAND AT-60

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ROLAND AT-60 will begin.