User manual ROLAND AT-90S LUXURY

[. . . ] Before using this unit, carefully read the sections entitled: "IMPORTANT SAFETY INSTRUCTIONS" (p. 2), "USING THE UNIT SAFELY" (p. 3, 4), and "IMPORTANT NOTES" (p. These sections provide important information concerning the proper operation of the unit. [. . . ] 188). NOTE If you load performance data (such as SMF music files) that was not designed for an ATELIER Series instrument and play it back, you may find, when playing rhythms and automatic accompaniment, that the music doesn't sound quite like it should. (For example, the wrong sounds could be played). If you want the data to be played back accurately, first press the [Reset] button prior to playback. The Rec/Play screen appears. fig. 07-04_50 Add a Count Sound to Match the Timing (Count In) 2. Touch <Reset>. The location at which playback will start will return to the beginning of measure 1. If you wish to begin playback from the middle of the song, touch <Bwd> <Fwd> to move to the measure from which you wish to begin playback. In cases such as when you want to perform in time with a song, you can have a count sound played before playback of the song begins, allowing you to synchronize your own performance with the song. Playing back a song after playing the count sound is called "Count In. " 1. Hold down the [Reset] button and press the [Play/ Stop] button. The metronome will play two measures (bars) of countin before recording begins. 3. Touch <Play> to begin playback. After playback reaches the end of the performance, it will stop automatically. You can also begin playback by pressing the Composer [Play/Stop] button. 154 Max Max Max Max Min Min Min Min Harmony Intelligence Chapter 7 Recording/Playing Back What You Play Recording Each Part Separately In this method, each part (track button) is recorded one after another: first the Rhythm part, then the bass part, etc. If there are any previously recorded performances, you can listen to them as you record additional parts. 5. In the Rec/Play screen, touch <Play> to begin recording. When you touch <Play> in the Rec/Play screen, the metronome will sound a two-measure count, and then recording will begin. As you listen to the performance song previously recorded, record the Part into a new Track. 1. Select the panel settings needed for recording the performance. 2. Touch <Rec/Play> on the Main screen. The Rec/Play screen appears. fig. 07-04_50 You can also start recording by pressing the Composer [Play/Stop] button. 6. In the Rec/Play screen, touch <Stop> to stop recording. The track button for which performance data has been recorded will be lit. You can also stop recording by pressing the Composer [Play/Stop] button. 3. Touch the <Bwd> and <Fwd> buttons to select the desired measure (bar) when you start recording. If you wish to start recording from the beginning of the song, touch the <Reset> button. 4. In the Rec/Play screen, touch <Rec> to enter recording-standby mode. <Play> and the unrecorded track buttons in the screen will blink. The track buttons that are already recorded will light. fig. 07-15 lit blink Also, the panel Composer [Rec] button indicator will light, and [Play/Stop] button will blink. You can also enter recording-standby mode by pressing the Composer [Rec] button. 155 Max Max Max Max Min Min Min Min Harmony Intelligence Chapter 7 Recording/Playing Back What You Play Re-Recording If you made a mistake in your performance during recording etc. , you can re-record just a portion of the musical data in the track. You can also enter recording-standby mode by pressing the Composer [Rec] button. 4. Touch the Track button which you wish to rerecording (button flashes). The song data of the specified Track (with the exception of the Control Track) will be erased as new song data is recorded. NOTE If you wish to re-record with different settings for voices, tempo, part balance, erase the recorded song (p. If the Control track still contains data from before you re-recorded, the volume or sounds may change during playback. 1. Touch <Rec/Play> on the Main screen. The Rec/Play screen appears. fig. 07-04_50 When the Track button is lit constantly, no song data has been recorded on that Track. 5. [. . . ] 409, Nirman Kendra Mahalaxmi Flats Compound Off. Edwin Moses Road, Mumbai-400011, INDIA TEL: (022) 2493 9051 BRAZIL Roland Brasil Ltda Rua San Jose, 780 Sala B Parque Industrial San Jose Cotia - Sao Paulo - SP, BRAZIL TEL: (011) 4615 5666 PANAMA SUPRO MUNDIAL, S. A. Boulevard Andrews, Albrook, Panama City, REP. DE PANAMA TEL: 315-0101 MIDDLE EAST BAHRAIN Moon Stores No. 16, Bab Al Bahrain Avenue, P. O. Box 247, Manama 304, State of BAHRAIN TEL: 211 005 HUNGARY Roland East Europe Ltd. [. . . ]