User manual ROLAND BA-55

[. . . ] GREEN-AND-YELLOW: EARTH, BLUE: NEUTRAL, BROWN: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured GREEN or GREEN-AND-YELLOW. The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Indoor or Outdoor Two-way power--use batteries or AC adaptor Battery life is approximately 6 hours, allowing convenient use anywhere, indoors or outdoors. [. . . ] Switching the Power Off Turn the power off by reversing the order in which you turned the power on. Português Turn the grip in the direction of the arrow to reattach it . Nederlands Grip 11 Using a Mic Using a Wireless Mic Here's how to produce sound using the DR-WM55 wireless mic. The BA-55 will automatically detect the wireless mic. When the connection has been established, the blinking will change to steadily lit. Pairing When using the included wireless mic for the first time, the BA-55 must detect the mic you're using. " Once the wireless mic has been paired, the connection will be remembered even while the BA-55's power is switched off. The next time you turn on the power, the mic will already be paired. When pairing is completed, pairing mode will be cancelled and the system will return to normal operating mode. * Pairing mode will be cancelled if pairing is not accomplished within 30 seconds from the time that the WIRELESS 1 indicator starts blinking. Pairing to the WIRELESS 1 channel When shipped from the factory, the included wireless mic is already paired to the WIRELESS 1 channel. If you want to redo the pairing, or if you want to pair a different mic than the currently paired mic, proceed as follows. Pairing the second mic Here's how to pair the second mic to the WIRELESS 2 channel. Turn on the power of the BA-55 while holding down the [CHIME] button (p . Turn on the BA-55's power while holding down the [CHIME] button (p . Hold down the [CHIME] button until the WIRELESS 1 indicator blinks . In this example, we'll pair the wireless mic with the WIRELESS 2 channel. Turn on the power switch of the second wireless mic while holding down the [ECHO ON] switch . The BA-55 will automatically detect the wireless mic. When the connection has been established, the blinking will change to steadily lit. Hold down the [CHIME] button until the WIRELESS 1 indicator blinks . In this example, we'll pair the wireless mic with the WIRELESS 1 channel. [. . . ] This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment requires shielded interface cables in order to meet FCC class B limit. Any unauthorized changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. [. . . ]