User manual ROLAND BR-1200CD

[. . . ] Confirm that the list of CD track markers is correct. Feedback 0?100 SP Simulator Type SMALL MIDDLE JC-120 TWIN twin MATCH match VO DRV vo drv BG STK bg stk MS STK ms stk METAL Cabinet Small open-back enclosure Open-back enclosure Speaker Unit 10 inch 12 inch Microphone Setting On Mic On Mic On Mic On Mic Off Mic On Mic Off Mic On Mic Off Mic OnMic Off Mic On Mic Off Mic Off Mic Comments Open-back enclosure 12 inch (two units) Open-back enclosure 12 inch (two units) Open-back enclosure 12 inch (two units) Open-back enclosure 12 inch (two units) Open-back enclosure 12 inch (two units) Open-back enclosure 12 inch (two units) Open-back enclosure 12 inch (two units) Large Sealed enclosure 12 inch (two units) Large sealed enclosure 12 inch (two units) Large sealed enclosure 12 inch (four units) Large sealed enclosure 12 inch (four units) Large dual stack 12 inch (four units) Roland JC-120 Simulation A setting suitable for Clean A setting suitable for Clean A setting suitable for Match A setting suitable for Match A setting suitable for Vo A setting suitable for Vo A setting suitable for BG Lead A setting suitable for BG Lead A setting suitable for MS A setting suitable for MS ???????????????????? SP Simulator Type AC ac AMG amg Cabinet Speaker Unit Microphone Setting On Mic Off Mic On Mic Off Mic Comments A setting suitable for AC A setting suitable for AC A setting suitable for AMG A setting suitable for AMG Large sealed enclosure 15 inch (two units) Large sealed enclosure 15 inch (two units) Large sealed enclosure 10 inch (eight units) Large sealed enclosure 10 inch (eight units) Rev0. 16) 00H - 7FH (0 - 127) Received via the MIDI channel set for the EXP PEDAL when the MIDI parameter ?MIDI Fader? [. . . ] Explanation Exclusive status ID number (Universal Non-realtime Message) Device ID (dev: 10H - 1FH, 7FH) Sub ID#1 (General Information) Sub ID#2 (Identity Request) EOX (End Of Exclusive) Control Change * Transmitted according to the content of the SMF during playback of SMFs. When this message is received, Identity Reply message (???. N = MIDI channel number: mm, ll = Bank number: * * About Device ID Exclusive messages are not assigned to any particular MIDI channel. Instead, they have their own special control parameter called device ID. The Roland exclusive messages use device IDs to specify various devices. Press [UTILITY], move the cursor to [MIDI], then press [ENTER/YES]. then rotate the TIME/VALUE dial to set the device ID. The Device ID can be set to any number from 17 to 32. Is set to PC+BANK, this is transmitted via the MIDI channel selected in the Effects Ch. Setting when insert effects patches are switched. For the correspondence between Bank Select/Program numbers and the insert effect patch banks/numbers, see ???. 16) 00H - 7FH (0 - 127) n = MIDI channel number: vv = Volume: * When the MIDI parameter ?MIDI Fader?is set to ON, this is transmitted via the MIDI channel set for a track when the corresponding track fader is moved. 16) 00H - 10H (0 - 16) n = MIDI channel number: vv = Expression: * n = MIDI channel number: mm = mono number: When the MIDI parameter ?MIDI Fader?is set to ON, this is transmitted via the MIDI channel set for the EXP PEDAL when the EXP PEDAL is operated. 128) n = MIDI channel number: n = MIDI channel number: pp = Program number: * * System Common Messages Quarter Frame Messages Status Second F1H mmH (= 0nnndddd) nnn = Message type: 0 = Frame count LS nibble 1 = Frame count MS nibble 2 = Seconds count LS nibble 3 = Seconds count MS nibble 4 = Minutes count LS nibble 5 = Minutes count MS nibble 6 = Hours count LS nibble 7 = Hours count MS nibble dddd = 4 bit nibble data: 0H - FH (0 - 15) * If the Sync parameter ?Sync Gen. quarter frame messages of the time code type specified by ?MTC Type?will be transmitted when the BR-1200CD is running (recording or playing). The transmitted time counts are summed to ?SMPTE (MTC) Offset Time?* Transmitted according to the content of the SMF during playback of SMFs. [. . . ] Remarks Exclusive status Universal System Exclusive Realtime Header Device ID (7FH) MMC command message LOCATE (MCP) Byte count ?TARGET?sub-Command Standard Time Specification with subframes EOX (End of Exclusive) If the efficient Maker of the locate switch is pressed or when moved, the BR-1200CD transmits this message. mIDI Time Code Command Full Message Basic operation of quarter frame messages will be handled. Status Data Byte Status F0H 7FH, Dev, 01H, 01H, hrH, mnH, scH, frH F7H Byte F0H 7FH Dev 01H 01H hrH yy Remarks Exclusive status Realtime Universal System Exclusive Header Device ID (7FH) sub-ID #1 (MIDI Time code) sub-ID #2 (Full message) hours and type: 0 yy zzzzz type: 00 = 24 Flame/sec 01 = 25 Flame/sec 10 = 30 Flame/sec (Drop Format) 11 = 30 Flame/sec (Non Drop Format) Hours (00 - 23) Minutes (00 - 59) Seconds (00 - 59) Frames (00 - 29) EOX (End of Exclusive) zzzzz: mnH scH frH F7H * This message is transmitted when the song position moves. [. . . ]