User manual ROLAND BR-532

[. . . ] Owner's Manual Thank you, and congratulations on your choice of the BOSS BR-532 Digital Studio. Before using this unit, carefully read the sections entitled: · USING THE UNIT SAFELY (page 2­3) · IMPORTANT NOTES (page 4­5) These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner's manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. s Printing Conventions in This Manual · Text or numerals enclosed in square brackets [ ] indicate buttons. [. . . ] Press [EXIT] several times to return to the Play page. Example: exchanging all the data on track 1 with all the data on track 2 fig. R08-26 Track 1 A Track 2 D E B C Advanced Use Track 1 D Track 2 A B C E Time 1. Press PARAMETER [ ][ "TRK, " and press [ENTER]. fig. R08-02 ] to move the cursor to 3. Press PARAMETER [ ][ "EXC, " and press [ENTER]. fig. R08-27 ] to move the cursor to 4. Press PARAMETER [ ][ ] to move the cursor, and turn the TIME/VALUE dial to select the two tracks/ V-Tracks to exchange data. When you are ready to execute the exchange, press [ENTER]. Press [EXIT] several times to return to the Play page. 57 Canceling a recording or editing procedure--Undo/Redo Occasionally when the recording you make may not turn out as you wish, or the settings you make for an editing operation are incorrect, and you want to reverse what you have done. At these times, you can use the "Undo function. " The Undo function reverses the action you have just performed and returns you to the status you were in beforehand. To reverse an Undo, you must use the "Redo function. " For example, suppose you are punching in to loop record and record over the same location twice. To undo the recording you just performed and return to the first recording, you would use the Undo function. To then reverse the Undo and return to the condition that you were in immediately after the second recording, you would use the Redo function. * After you have performed an Undo, you can only perform a Redo (you cannot perform an Undo again). * After you have performed an Undo, if you perform any recording, select another song, or perform any action that saves data to memory, you'll no longer be able to perform the Redo. Reversing the last operation --Undo 1. "Are you sure?" appears. fig. R09-01 2. Press [ENTER] to reverse the last performed recording or editing operation. If you decide not to Undo, press [EXIT] (NO). Press [EXIT] to return to the Play page. Canceling the Undo --Redo To reverse the Undo you just executed, perform a Redo. "Are you sure?" appears. fig. R09-02 2. The Undo you just performed is reversed. If you decide not to Redo, press [EXIT] (NO). Press [EXIT] to return to the Play page. 58 Organizing the songs you've recorded Copying a Song (Song Copy) Follow the procedure below to copy a song from the memory card. Press PARAMETER [ ][ "SEL, " and press [ENTER]. The Song screen appears. fig. R10-01 Erasing songs (Song Erase) Follow the procedure below to erase a song from the memory card. [. . . ] 15 120 MEMO. . . . 121 122 Track Sheet Track Sheet TRACK 2 TRACK 3 TRACK 4 TRACK 1 PAN Loop Level Loop Level PAN PAN PAN Loop Level Loop Level EFFECTS COMMENTS Insert Mode: Loop: For EU Countries This product complies with the requirements of European Directive 89/336/EEC. For the USA FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ]