User manual ROLAND C-200

[. . . ] US (Proposition 65) For the U. K. For EU Countries This product complies with the requirements of EMC Directive 2004/108/EC. For the USA For Canada C-200 Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, owner's manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Copyright © 2011 ROLAND EUROPE S. p. a. All rights reserved. [. . . ] The demo songs are divided over 4 banks (see the table on p. 19). Listening to all demo songs 1. While holding down the [Function] piston, press the [Demo] (PLAY/PAUSE) piston. The C-200 starts playing all demo songs. The first piston in the Harpsichord section flashes to indicate that Bank 1 is selected. Tilt tab "1" also flashes to indicate that the first song of that bank is playing. Demo playback will continue repeating all available songs until you stop it. You can't control the voices while a demo performance is in progress. Listening to a specific demo song 2. Press the Harpsichord piston of the desired bank. The tilt tabs that can be used to select demo songs now light. See the table below for the correspondence between the tilt tabs and the demo song banks. The demo songs are divided over four banks: the first bank contains demonstrations of the Organ sounds, the second showcases the Harpsichord sounds, the third contains demo songs for the Fortepiano sound and the fourth showcases the Piano sound. 18 Getting Ready to Play 3. Press the lower part of the PEDAL or lit MANUAL I tab that is assigned to the demo song you want to listen to. Playback of the selected song starts immediately (the corresponding tab flashes). Demo playback will continue repeating all available songs until you stop it. The four banks contain the following demo songs: Harpsichord button Bank 1 (8' I) Type (Organ songs) Bank 2 (8' II) (Harpsichord songs) Bank 3 (4') (Fortepiano songs) Bank 4 (Lute) (Piano songs) 1 PEDAL/MANUAL I tilt tabs 2 3 4 5 6 7 8 9 J. S. 65 G. F Händel ­ Allegro Finale J. S. Bach ­ Goldberg-Variationen Aria J. S. Bach ­ Französische Suiten, No. Bach ­ Das wohltemperierte Klavier 1­ 1 (Ave Maria) F. 2 for Dynamic Harpsichord ---------------------- J. 1, Anitra's Dance ---------------------- * All rights reserved. Unauthorized use of this material for purposes other than private, personal enjoyment is a violation of applicable laws. * No data for the music that is played will be output from MIDI Out. * Regarding "Das Wohltemperierte Klavier, 1-1 (Ave Maria)", this song is arranged for ensemble with a flute or recorder melody. [. . . ] To prevent this, choose the "Local Off" setting so that route (1) is disconnected. Local On MIDI IN MIDI OUT (1) Local On Local Off No sound produced Sequencer Sound Generator Sound is emitted Memory MIDI OUT MIDI IN Sound Generator Local On Sound Generator Local Off Each note played is sounded twice (2) Soft Thru On While holding down the [Function] piston, press the Harpsichord [4'] piston to switch off the Local function. Repeat this operation to select Local On again. * If you've selected Local Off and no sequencer is connected, you won't hear any sound when you play the C-200's keyboard. The Local On setting is selected when you turn on the power. 42 Additional Convenient Functionality <Advanced Operation> Using the Visual Control function "Visual Control" is a function that allows music and images to be performed together. [. . . ]