User manual ROLAND C-330

[. . . ] Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (page 5­8). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, owner's manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Copyright © 2009 ROLAND CORPORATION All rights reserved. [. . . ] To do this, turn the [Value/Exit Menu] knob in step 4 to select "USB. " With this setting, song data will be copied from USB memory to the C-330's internal memory. The rest of the procedure is the same as when copying a song to USB memory. 49 Saving or Loading Songs or Settings About the C-330's sound set (Voice Setup) A "Voice Setup" contains data that specifies the volume balance of each sound (stop), its brightness, and various adjustments for parameters. By loading a voice setup, you can change the overall character of the entire organ (for example to make it a French Romantic type of organ). The C-330 allows you to switch voice setups. You can also load voice setup files from USB memory. Switching voice setups Here's how you can switch to a different voice setup. 1. From the main screen, press the [Select/Menu] knob. Turn the [Select/Menu] knob to select "11 Save/Load (USB). " fig. D-Save-1. eps 3. Press the [Select/Menu] knob. The "Save/Load (USB)" screen will appear. fig. Tremulant2. eps 4. Turn the [Select/Menu] knob to select "Load Voice Setup. " 5. Press the [Select/Menu] knob. The "Load Voice Setup" screen will appear. fig. Tremulant2. eps 6. Turn the [Select/Menu] knob to select the "Load from" field, and turn the [Value/Exit Menu] knob to choose the location of the voice setup you want to use. Setting FACTORY INTERNAL Explanation The factory-set voice setup A voice setup in the C-330's internal memory 7. Turn the [Select/Menu] knob to select "No. " 8. Turn the [Value/Exit Menu] knob to select the name of the voice setup that you want to use. If you selected "FACTORY, " there will be only one voice setup. 9. Press the [SET] piston. The following screen will appear. If you decide to cancel, press the [Value/Exit Menu] knob. fig. D-Save-1. eps 50 Saving or Loading Songs or Settings 10. Press the [SET] piston. The C-330's voice setup will switch to the voice setup you loaded. If you want the setting to be remembered even after the power is turned off, refer to "Storing your settings (Customize)" (p. To prevent malfunction, never turn off the power while the voice setup is being switched. Saving a voice setup to USB memory Here's how you can save the currently used voice setup to USB memory. 1. Connect your USB memory to the USB memory connector. From the main screen, press the [Select/Menu] knob. Turn the [Select/Menu] knob to select "11 Save/Load (USB). " fig. D-Save-1. eps 4. Press the [Select/Menu] knob. The "Save/Load (USB)" screen will appear. fig. Tremulant2. eps 5. [. . . ] Edwin Moses Road, Mumbai-400011, INDIA TEL: (022) 2493 9051 GERMANY Roland Elektronische Musikinstrumente HmbH. Oststrasse 96, 22844 Norderstedt, GERMANY TEL: (040) 52 60090 BRAZIL Roland Brasil Ltda. Rua San Jose, 211 Parque Industrial San Jose Cotia - Sao Paulo - SP, BRAZIL TEL: (011) 4615 5666 UNITED KINGDOM Roland (U. K. ) Ltd. Atlantic Close, Swansea Enterprise Park, SWANSEA SA7 9FJ, UNITED KINGDOM TEL: (01792) 702701 PANAMA SUPRO MUNDIAL, S. A. [. . . ]