User manual ROLAND CE-20 MANUAL 2

[. . . ] Thank you, and congratulations on your choice of BOSS CE-20 Dimensional Processor. Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (separate sheet). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, this manual should be read in its entirety. [. . . ] No function is assigned to the DEPTH knob when "DIMENSIONAL D" or "CE-1" is selected. 19) DEPTH Knob Adjusts the chorus depth. * No function is assigned to this knob when MODE is set to "DIMENSIONAL D" or "CE-1. " RATE Knob Adjusts the chorus rate. 2 3 4 1+4 2+4 * When "DIMENSIONAL D" is selected as the MODE, this knob provides for selection among the SDD-320's 1, 2, 3, 4, 1+4, 2+4, 1 3+4 and 3+4 settings. * When MODE is set to "CE-1, " this knob functions as an INTENSITY knob, used to adjust the amount of chorus effect. Rate Indicator The flashing of this indicator light changes in sync with the chorus rate set with the RATE knob, allowing you to confirm the chorus rate at a glance. 18 Part Names and Functions MODE List Type RICH BASS ACOUSTIC STANDARD DIMENSIONAL D Features Chorus with unprecedented breadth and minimal thinning of the sound. Chorus specially tuned for bass that maintains the low end. Great for that bass or heavy guitar sound. Chorus tuned especially for acoustic guitar. Ripple is minimized for a natural-sounding chorus effect. A perfect sound suitable for any kind of instrument. Models the Roland DIMENSION D (SDD-320). With this mode selected, you can use the RATE knob to switch between 1, 2, 3, 4, 1+4, 2+4, and 3+4 settings. * The DEPTH knob is assigned no function in this mode. CE-1 Models that venerable classic, the BOSS "CE-1" Chorus Effect. This effect provides a chorus sound with the CE1's characteristic analog warmth. When the CE-1 mode is selected, the RATE knob functions as an INTENSITY knob, allowing you to adjust the amount of chorus effect applied. * The DEPTH knob is assigned no function in this mode. 19 Part Names and Functions fig. 25 PEAK Indicator This lights up when the signal is at before cliping. If the PEAK indicator lights up frequently, turn down the E. LEVEL knob. Also check the LOW, HIGH, BRILLIANCE, and AMBIENCE knob settings; if raised, try reducing these settings. If in spite of these measures the PEAK indicator continues to light up, lower the output level of the device connected to the INPUT jacks or set the LEVEL switch to +4 dBu. MEMORY Number Indicator (1­4) The indicator for the currently selected MEMORY number (1­4) lights. The indicator flashes while the CE-20 is in write standby; the indicator flashes more rapidly while the write operation is in progress. POWER Indicator This lights up when the power is on. SELECT Button This changes the memory 1­4. EFFECT ON/OFF Indicator This lights up when effects are on. WRITE Button Press this to store settings in "MEMORY. " EFFECT ON/OFF Pedal Each press of the pedal switches the effects on or off. MANUAL/MEMORY Pedal Select the unit between "MANUAL, " which produces the sound of the panel knob settings unchanged, and "MEMORY, " where settings have been stored in advance. Functions differ according to the Pedal mode settings; make the most appropriate setting for your particular application. "MANUAL/MEMORY Pedal Operation" (p. [. . . ] Check the settings on the connected equipment (p. Is the LEVEL switch on the rear panel set correctly? Set the LEVEL switch to match the connected equipment (p. Only the effect sound is output when this is set to OFF. [. . . ]