User manual ROLAND CE-3

[. . . ] The manual should be saved and kept on hand as a convenient reference. Main Features q Provides six chorus sound types, including newly developed "RICH, " "BASS, " and "ACOUSTIC" sounds, plus CE-1 and SDD-320 modeling. q New "BRILLIANCE" control lets you adjust the guitar's harmonic content and the chorus's characteristic glistening effect. q "AMBIENCE" control developed especially for chorus lets you add greater body and richness to the chorus effect. q All inputs and outputs are stereo-compatible. [. . . ] Pedal Mode 1 2 3 EFFECT ON/OFF EFFECT ON/OFF Pedal MANUAL/MEMORY Pedal + Pedal MANUAL/MEMORY Pedal effect on/off effect on/off effect on/off ­ ­ Switches MANUAL/MEMORY 1/2/3/4 Switches MANUAL/MEMORY Selects from MEMORY 1­4 Switches MANUAL/MEMORY 12 Operation Panel Operation In order to follow along with the instructions given here, you should start out by having effects switched ON (press the EFFECT ON/OFF pedal and confirm that the EFFECT ON/OFF indicator has lighted), and press the MANUAL/MEMORY pedal to switch MANUAL (MANUAL indicator has lighted). Also set the knobs as shown in the illustration. fig. 17 7 6 4 5 1 2 3 1. Select an appropriate chorus effect from the six available types. Adjust the chorus rate by rotating the RATE knob. Adjust the chorus depth by rotating the DEPTH knob. * No function is assigned to this knob when MODE is set to "DIMENSIONAL D" or "CE-1. " 4. Rotate the BRILLIANCE knob to adjust the amount of "glisten" in the high end. Rotate the AMBIENCE knob to adjust the amount of body and richness in the effect sound. Adjust the tonal qualities of the effect sound with the EFFECT TONE LOW and HIGH knobs. Adjust the volume of the effect sound with the E. LEVEL knob. 13 Operation Storing Settings (Write Operation) Storing the "MANUAL" Sound in Memory Do not switch off the power while a write operation is in progress. Create the sound you want when set to "MANUAL. " 2. For monaural use, make the connection to the R (MONO) jack. 3­9) * Turn on the power before you connect headphones. When turning off the power, first unplug the headphones, then switch off the power. * Please observe due caution when using headphones while the LEVEL switch is set to +4 dBu, since their volume may get significantly higher. * The INPUT R (MONO) jack also doubles as the power switch when the unit is running on battery power. The power comes on when a plug is inserted into the INPUT R (MONO) jack, and goes off when it is unplugged. Unplug any connected cords when the unit is not in use. AC Adaptor Jack This jack is for connecting an AC adaptor (BOSS PSA-series, sold separately). Using an AC adaptor makes possible long performances with no worry about batteries going dead. LEVEL Switch This switch sets the input level to correspond to the device connected to the INPUT jacks. GUITAR/BASS: When using an electric guitar or bass guitar. AMPLIFIER, SEND/RETURN: When connected to send or return on a guitar amp or the like, or when connected to a largevolume output device "Making the Connections" (p. 3­9) OUTPUT Jacks (R (MONO), L) This jack is for connection to a guitar/bass amp, another effects processor, mixer, MTR, or the like. For monaural use, make the connection to the R (MONO) jack. [. . . ] When using battery power, connect the plug to the INPUT R (MONO) jack. Is the specified AC adaptor (PSA-series sold separately) connected correctly?3­9). There is no sound/volume is too low. Is the other equipment connected correctly? Is the volume turned down on the connected guitar/bass amp, effects processor, or other device? [. . . ]