User manual ROLAND CM-32L

[. . . ] The manual should be saved and kept on hand as a convenient reference. Conventions Used in This Manual Operating buttons are enclosed in square brackets; e. g. , [PIANO]. The special symbols have the following meanings. This indicates an important note you must read. This indicates a memo regarding settings or functionality. [. . . ] This screen will also appear if you hold down [METRONOME] for a few moments. Specifies the volume of the metronome. Metro Vol Octave Parameters Parameter Main Oct * Value -4­0­4 (default: 0) -4­0­4 (default: 0) -4­0­4 (default: 0) Explanation Raises or lowers the octave setting of the Main part in steps of one octave. * If a drum set is assigned to the Main part, this parameter does not transpose the pitch of the drum/percussion sounds, but instead changes the drum/percussion sounds that are assigned to the keys. Raises or lowers the octave setting of the Dual part in steps of one octave. Raises or lowers the octave setting of the Split part in steps of one octave. Dual Oct * Split Oct * Volume Parameters Parameter Main Vol * Dual Vol * Split Vol * Auto Bass Value 0­127 (default: 127) 0­127 (default: 110) 0­127 (default: 75) OFF, 0­127 (default: OFF) Explanation Adjusts the volume of the Main part. You can also adjust this by holding down [TONE] and using BALANCE [ Adjusts the volume of the Dual part. You can also adjust this by holding down [DUAL] and using BALANCE [ Adjusts the volume of the Split part. You can also adjust this by holding down [SPLIT] and using BALANCE [ ][ ]. 10) When the Split part is on, this adjusts the volume of the Auto Bass part (which plays a monophonic bass according to the chord you play). Turn this OFF if you don't need the Auto Bass part. 24) is off, the root of the chord you play with your left hand (using the Split part) is sounded by the Auto Bass part. This screen will also appear if you hold down [MELODY INTELLIGENCE] for a few moments. 14) Arr Hold * OFF, ON (default: ON) Educational OFF, ON (default: ON) Bass Inv * OFF, ON (default: OFF) MI * -> p. 14 (default: Traditional) EFFECTS Parameters Parameter REVERB * CHORUS * MFX * Tone MFX Value 8 types -> p. 17 (default: Chorus 3) 47 types -> p. 17 (default: Rotary) OFF, ON (default: ON) Explanation Selects the type of reverb. 17) This lets you specify whether the MFX type will be automatically selected according to the Main part tone you select. For example, a distortion/overdrive effect will be selected for rock guitar tones, and a rotary effect will be selected for organ tones. OFF: The MFX will not change when you switch the tone of the Main part. ON: The MFX will change when you switch the tone of the Main part. Adjusts the amount of reverb applied to the tone of the Main part. With a setting of "0" there will be no reverb. [. . . ] MEXICO TEL: (55) 5668-6699 TURKEY ZUHAL DIS TICARET A. S. No. 37 Beyoglu - Istanbul / TURKEY TEL: (0212) 249 85 10 FINLAND Roland Scandinavia As, Filial Finland Elannontie 5 FIN-01510 Vantaa, FINLAND TEL: (0)9 68 24 020 BARBADOS A&B Music Supplies LTD 12 Webster Industrial Park Wildey, St. Michael, Barbados TEL: (246)430-1100 UKRAINE EURHYTHMICS Ltd. 30 UA - 89600 Mukachevo, UKRAINE TEL: (03131) 414-40 U. A. E. Zak Electronics & Musical Instruments Co. TEL: (04) 3360715 NICARAGUA Bansbach Instrumentos Musicales Nicaragua Altamira D'Este Calle Principal de la Farmacia 5ta. Avenida 1 Cuadra al Lago. #503 Managua, Nicaragua TEL: (505)277-2557 GERMANY Roland Elektronische Musikinstrumente HmbH. [. . . ]