User manual ROLAND CPM-300

[. . . ] [SONG] START [ SONG button ] START button · Reference such as (p. **) indicate pages in this manual to which you can refer. Copyright © 2003 BOSS CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of BOSS CORPORATION. USING THE UNIT SAFELY Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly. Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly. [. . . ] When you press [EXIT], the setting is changed, and you're returned to the previous screen. 63 Chapter 7 Creating Styles Making the TSC Settings for the Style Make the TSC (Sound Shape and Ambience) settings for the style you are creating. Select the style to be set, then press [EDIT]. Select a <STYLE>, then press [ENTER]. Press [ Item Determining the Number of Measures for Each Pattern * Fill-Ins A­C are set at one measure each. Select a <STYLE>, then press [ENTER]. Press [ ], select a <PATTERN>, then press [ENTER]. fig. 07-06d ], select the item to be set. Value Description Shape Sw Shape Ambi Sw Ambi fig. 07-08d ON, OFF P1­P8, U1­U8 ON, OFF P1­P8, U1­U8 This sets the Sound Shape On/Off setting to be used when this Style is selected. This sets the Sound Shape when this Style is selected. This sets the Ambience On/Off setting to be used when this Style is selected. This sets the Ambience when this Style is selected. 4. Press [ ][ ] to select the pattern to change the setting. Select the pattern with "PATTERN MEAS" displayed the upper part of the screen. * For more on "PTN KEY TRANS" in the upper row and the screens that are displayed, refer to "Transposing the Pattern's Bass Part" (p. For example, when recording with "DRUM" selected for [INST], holding down STEP REC [ ] and pressing [VERSE A (SNR 2)] erases the SNR 2 sounds that have already been recorded. Style No. Pattern Name Measure Beat Sound Group Quantize 3. Turn the VALUE dial to set the quantization. This corrects mistakes in the rhythm played to the closest selected note value. 65 Chapter 7 Creating Styles · Recording the Bass Part * Bass parts are monophonic. Even if multiple notes are layered in a recording, only one sound is played. Erasing Previously Recorded Sounds As You Continue Recording You can use the following procedure to erase the bass sounds in the pattern currently being recorded. Hold down STEP REC [ ] and press any one pad. All bass sounds, regardless of pitch, are erased while STEP REC [ ] and the pad are held down. * When erasing long note sounds, press the key pad at the point the sound begins to play. Regardless of the length of the note, the entire sound recorded at that time is erased. Steps 1­3 are identical to those in "Recording the Drum Part" above. Press [INST] to select "BASS, " " or " fig. 07-09d BASS" BASS. " Style No. Pattern Name Measure Beat Octave Sound Quantize for bass Group 5. Record the performance, pressing the pads while following the rhythm provided by the metronome. The force used to tap the pads is recorded as velocity (the strength or stress of the sound). [. . . ] 89 124 Index T Tempo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27, 36, 41 Song . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 TSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]