Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ROLAND CS-10. We hope that this ROLAND CS-10 user guide will be useful to you.
Lastmanuals help download the user guide ROLAND CS-10.
Detailed instructions for use are in the User's Guide.
[. . . ] Should you remove screws, cord clamps, or stabilizer, make sure to put them in a safe place out of children's reach, so there is no chance of them being swallowed accidentally. When putting the Pedal Board on the stabilizer, first loosen the attachment screws securing the speaker box to the side boards. Connect the speaker cable extending from the rear of the speaker box to the CS-10's speaker connector. [. . . ] Connect the speaker cable extending from the rear of the speaker box to the CS-10's speaker connector. Before you begin assembling the CS-10, check that all the parts were supplied. You will also need to have a Phillips screwdriver. When securing the screws, lay the entire unit sideways with the rear side of the CS-10 at the bottom. Secure the left side board to the speaker box with the attachment screws (in two places). attach so that the speaker cable at the rear of the speaker box is directed to the right. Secure the right side board to the speaker box with the attachment screws (in two places). The speaker box can also be installed so that it faces toward the rear instead of toward the front. Having the speaker box face out the rear of the instrument allows the speakers to be directed toward listeners when the back of the instrument faces the audience. Take care not to attach the left and right stabilizer to the wrong sides. Fasten the piano to the stand with the attachment screw (M6 x 20 mm) (one each for the right and left). Please don't get your fingers pinched Disassemble the unit by carrying out assembly Steps 111 in reverse order. At first, assemble the entire unit in a temporary fashion, without really tightening the screws. Then, after checking the overall alignment of the boards (and gently shifting certain parts where necessary), go around and tightly fasten each of the screws. [. . . ] Please don't get your fingers pinched Disassemble the unit by carrying out assembly Steps 111 in reverse order. At first, assemble the entire unit in a temporary fashion, without really tightening the screws. Then, after checking the overall alignment of the boards (and gently shifting certain parts where necessary), go around and tightly fasten each of the screws. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ROLAND CS-10
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ROLAND CS-10 will begin.
