User manual ROLAND DA-2496 ANNEXE 469

[. . . ] Owner's Manual We'd like to take a moment to thank you for purchasing the DA-2496 (Digital Audio Interface). This document explains how to set up the DA-2496 system. To avoid problems and enjoy optimal performance, please carefully follow the setup instructions described in this document. 201b Before using this unit, carefully read the sections entitled: "IMPORTANT SAFETY INSTRUCTIONS" (p. 2), "USING THE UNIT SAFELY" (p. 3, 4), and "IMPORTANT NOTES" (p. 5, 6). [. . . ] From the CD-ROM drive (DA2496_drv) -> Win2000 folder, select DAPCI. INF, and click "Open. " 8 fig. 3-6e Click "OK. " 9 The dialog box shown at the right will appear. Click "Next. " * If more than one device driver is displayed, click the device driver that is displayed as DA-PCI. If the "Driver update notification" dialog box appears, click "Yes. " fig. 3-7e 10 When the "Start installing the device driver" dialog box appears, click "Next. " If the display indicates "Could not find digital signature. . . Continue installation?, " click "Yes. " 11 Installation will begin. fig. 3-8e 12 When the display indicates "Completing the New Hardware Wizard finished. EDIROL DA-PCI: Windows are finished installing the Software for this device, " click "OK. " fig. 3-9e 13 When the dialog box shown at the right appears, click "Yes" to restart Windows. Next, you need to connect the DA-2496 to the DA-PCI. Proceed to Connecting the DA-2496 to the DA-PCI (p. 23). 22 Preparations for using the DA-2496 s Connecting the DA-2496 to the DA-PCI 1 2 Turn off the power of your computer. Connect the PCI cable included with the DA-2496 to the "TO DA-PCI" connector on the rear of the DA-2496. Then connect the other end of the DA-PCI cable to the connector of the DA-PCI. To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. fig. DA-2496_connect Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices. 3 4 5 Turn on the power of your computer. Turn on the power of the DA-2496. This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally. fig. DA-2496-top2 Make sure that the clock select switch located on the front panel of the DA-2496 is set to INT. For details on setting the clock select switch, refer to Synchronization settings (p. 41). Next, you need to make the driver settings. Please proceed to Audio/MIDI input and output settings (p. 24). 23 Preparations for using the DA-2496 s Audio/MIDI input and output settings * If you are using the DA-2496 with a sequencer or similar application, please read the operation manual for your application. fig. 017 1 Open the Control Panel. Click the Windows Start button, and from Settings, select the Control Panel. If you do not need to make audio/MIDI settings, proceed to Connecting the DA-2496 to the DAPCI (p. 23). If the Sound and Multimedia icon is not displayed, click "Display all Control Panel Options" from the frame at the left. fig. 012 2 3 Double-click the Sound and Multimedia icon (in Windows 98, the Multimedia icon). Click the Audio tab. Set the Sound Playback, Sound Recording, and Preferred MIDI Music Playback as follows. Windows Me/98 WavOut 1/2 EdirolDA-PCI PCM In 1/2 EdirolDA-PCI Midi Out EdirolDA-PCI Windows 2000 Edirol DA-PCI Edirol DA-PCI Edirol DA-PCI MIDI Sound Playback Sound Recording MIDI Music Playback Windows Me/2000 Windows 98 fig. 1-7e fig. 2-6e 24 Preparations for using the DA-2496 fig. 2-7e 4 5 If you are using Windows 98, click the MIDI tab, and select MIDI Out Edirol DA-PCI for MIDI output. Click [OK]. The window will close. This completes the basic settings for the DA-2496 and DA-PCI. If you want to use the Direct Monitor function of the digital mixer built into the DA-PCI, refer to DA-PCI Control Panel (p. 32). The standard driver included with Windows does not support ASIO. 25 Preparations for using the DA-2496 s Macintosh Use the following procedure to install the DA-PCI driver. * Disconnect the DA-2496 from your computer before starting up Macintosh. * Exit all applications before you begin installing the driver. * The DA-PCI OMS Driver included on the disc is provided as an additional module that allows the DA-PCI to be used with OMS. [. . . ] Paseo García Faria, 33-35 08005 Barcelona SPAIN TEL: 93 493 91 00 AFRICA EGYPT Al Fanny Trading Office 9, EBN Hagar A1 Askalany Street, ARD E1 Golf, Heliopolis, Cairo 11341, EGYPT TEL: 20-2-417-1828 QATAR Badie Studio & Stores P. O. Box 62, Doha, QATAR TEL: 423554 THAILAND Theera Music Co. 330 Soi Verng NakornKasem, New Road, Sumpantawongse, Bangkok 10100, THAILAND TEL: (02) 224-8821 HONDURAS Almacen Pajaro Azul S. A. BO. Paz Barahona 3 Ave. 11 Calle S. O San Pedro Sula, Honduras TEL: (504) 553-2029 CZECH REP. K-AUDIO Kardasovska 626. [. . . ]