User manual ROLAND DT-30

[. . . ] Open the legs of the tripod base and then tighten the round bolt 1 . Loosen t-bolt 2 and pull up the upper tube high enough so the tripod stand is able to stand flat on the floor. [. . . ] The manual should be saved and kept on hand as a convenient reference. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. If you need to make further height adjustments, repeat steps 5 and 6. Once the desired height is achieved, firmly tighten the square-headed bolt 3 of the memory lock. * In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice. Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly. Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly. * Material damage refers other adverse effects respect to the home furnishings, as well animals or pets. To damage or caused with and all its to domestic The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger. The symbol alerts the user to items that must never be carried out (are forbidden). The specific thing that must not be done is indicated by the design contained within the circle. [. . . ] Never use or store the unit in places that are: · , direct sunlight in an enclosed vehicle, near a heating duct, on top of heatgenerating equipment); or are · Never climb on top of, nor place heavy objects on the unit. Should you remove the square-headed bolt or round bolt, keep them in a safe place out of children's reach, so there is no chance of them being swallowed accidentally. [. . . ]