User manual ROLAND DIF-AT24 MANUAL 2

[. . . ] Owner's Manual Congratulations on your purchase of the Roland DIF-AT24. Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" (p. 2, 3) and "IMPORTANT NOTES" (p. These sections provide important information concerning the proper operation of the unit. [. . . ] 6 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Turning the power on/off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Turning the power on. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Turning the power off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Connections and settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Connection example 1 Connecting the VS-2400CD and a computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Connection example 2 Connecting the VS-2400CD and a computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Also transmits/receives synchronization signals. * Power is supplied to the DIF-AT24 via the R-BUS connector. Rear Panel MIDI IN/OUT connectors These are used mainly for MTC synchronization. The data that is transmitted from the MIDI OUT connector will depend on the settings of the R-BUS device connected to the R-BUS connector. · Connect only an R-BUS device to the R-BUS connector. You must never connect a device with a SCSI, RS-232C, or parallel interface. Even though the connectors on such devices may look similar, they are incompatible, and damage and/or malfunction could result if you attempt their connection. Also, you must use only a special R-BUS cable to make connections. · You must turn off the power of the R-BUS device before connecting or disconnecting the R-BUS cable. If you connect or disconnect the cable while power is being supplied, the external R-BUS device will stop working correctly, and the DIF-AT24 or the external R-BUS device may also be damaged. · The specifications for "R-BUS" are identical to those of RMDB2 and RMDB II. You can use it with any device that is marked "RMDB2" or "RMDB II. " · R-BUS (RMDB2) is not compatible with the older RMDB specification. 6 Turning the power on/off Turning the power on Before you turn each device on, make sure that all devices are connected correctly. Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/ or damage to speakers and other devices. 1 2 3 Turn on the power of your R-BUS device. When power is supplied to the DIF-AT24, its power indicator will light. Turn on the power of your computer, ADAT device, etc. Turn on the power of your audio device like audio mixers etc. Turning the power off 1 2 3 Turn off the power of your audio device like audio mixers etc. Turn off the power of your computer, ADAT device, etc. Turn off the power of your R-BUS device. Power will no longer be supplied, and the DIF-AT24's power indicator will go out. 7 Connections and settings Connection example 1 Connecting the VS-2400CD and a computer Here's an example of synchronization with computer-based sequencer software or the VS-2400CD functioning as the master. [. . . ] NSW 2099 AUSTRALIA TEL: (02) 9982 8266 SAUDI ARABIA aDawliah Universal Electronics APL Corniche Road, Aldossary Bldg. , 1st Floor, Alkhobar, SAUDI ARABIA P. O. Box 2154, Alkhobar 31952 SAUDI ARABIA TEL: (03) 898 2081 RUSSIA MuTek 3-Bogatyrskaya Str. 1. k. l 107 564 Moscow, RUSSIA TEL: (095) 169 5043 Roland Shanghai Electronics Co. , Ltd. No. 18 Anhuaxili Chaoyang District, Beijing 100011 CHINA TEL: (010) 6426-5050 BELGIUM/HOLLAND/ LUXEMBOURG Roland Benelux N. V. Houtstraat 3, B-2260, Oevel (Westerlo) BELGIUM TEL: (014) 575811 SPAIN Roland Electronics de España, S. [. . . ]