User manual ROLAND DP-900 ASSEMBLY

[. . . ] Assembling the DP-900 Make sure that another person is on hand to help with the assembly and setup. [. . . ] Secure the right side board to the speaker box with the screws (in two places). fig. st2. e 1: 2: 3: Attachment screw The speaker box can also be installed so that it faces toward the rear instead of toward the front. Having the speaker box face out the rear of the instrument allows the speakers to be directed toward listeners when the back of the instrument faces the audience. fig. stsp. e 3. Set the stabilizer in the holes in the side boards (in six places). fig. st3. e Normal direction Front Rear When facing to the rear Front Rear Stabilizer screws Speaker box Speaker box Take care not to attach the left and right stabilizer to the wrong sides. fig. st900SAP DP-900 4. Raise the entire assembly. When standing the assembled unit up, grasp near the speaker box and center part of the DP-900, and gently raise the assembly. fig. st4 8. Connect the speaker cable extending from the rear of the speaker box to the DP-900's speaker connector. Press the speaker cable completely into the connector so that it is securely fastened. fig. st8. e DP-900 Rear 5. Put the Pedal Board on the stabilizer. When putting the Pedal Board on the stabilizer, first loosen the screws securing the speaker box to the side boards. fig. st5. e Speaker Connecter Speaker cable Clip Portion Hold and insert the cable so that the clip portion extends into the stand and is securely connected. Loosen the screws (in four places). 9. [. . . ] * Take care not to allow your hands to becomme caught when holding the keyboard. fig. st7. e When Disassembling Disassemble the unit by carrying out assembly Steps 1-10 in reverse order. When Changing the Orientation of the Speaker Box Attachment screws Be sure to completely disassemble the unit, change the speaker box orientation, then reassemble it. 40563878 1PD [. . . ]