User manual ROLAND E-36

[. . . ] Note Number 95 (5FH) 96 (60H) 97 (61H) 98 (62H) 99 (63H) 100 (64H) 101 (65H) 102 (66H) 103 (67H) 104 (68H) 105 (69H) 106 (6AH) 107 (6BH) 108 (6CH) 109 (6DH) 110 (6EH) 111 (6FH) 112 (70H) 113 (71H) 114 (72H) 115 (73H) 116 (74H) 117 (75H) 118 (76H) 119 (77H) 120 (78H) 121 (79H) 122 (7AH) 123 (7BH) 124 (7CH) 125 (7DH) 126 (7EH) 127 (7FH) Pad Number 1. RECOGNIZED RECEIVE DATA sCHANNEL VOICE MESSAGE qNote On/Off Note On Status 9nH Second mmH Third llH 00H - 0FH (ch. 1 - ch. 16) 00H - 7FH (0 - 127) 01H - 7FH (1 - 127) n = MIDI Channel No. : mm = Note No. : ll = Velocity: Note Off Status 8nH 9nH Second mmH mmH Third llH 00H 00H - 0FH (ch. 1 - ch. 16) 00H - 7FH (0 - 127) 00H - 7FH (0 - 127) n = MIDI Channel No. : mm = Note No. : ll = Velocity: Received over the channels set with MIDI Channel. [. . . ] * For instructions on setting MIDI channels, refer to "How to Change the MIDI Channel" in the Owner's Manual (p. 53). At the factory settings, Note Numbers 23H­43H (35­67) are received. * For instructions on restoring the MIDI settings to the values set at the factory, refer to "Restoring the MIDI Settings to the Factory Settings" in the Owner's Manual (p. Note Number 35 (23H) 36 (24H) 37 (25H) 38 (26H) 39 (27H) 40 (28H) 41 (29H) 42 (2AH) 43 (2BH) 44 (2CH) 45 (2DH) 46 (2EH) 47 (2FH) 48 (30H) 49 (31H) 50 (32H) 51 (33H) 52 (34H) 53 (35H) 54 (36H) 55 (37H) 56 (38H) 57 (39H) 58 (3AH) 59 (3BH) 60 (3CH) 61 (3DH) 62 (3EH) 63 (3FH) 64 (40H) 65 (41H) 66 (42H) 67 (43H) Pad EXT SOURCE Pad A1 Pad A2 Pad A3 Pad A4 Pad A5 Pad A6 Pad A7 Pad A8 Pad B1 Pad B2 Pad B3 Pad B4 Pad B5 Pad B6 Pad B7 Pad B8 Pad C1 Pad C2 Pad C3 Pad C4 Pad C5 Pad C6 Pad C7 Pad C8 Pad D1 Pad D2 Pad D3 Pad D4 Pad D5 Pad D6 Pad D7 Pad D8 Pad Number Pad EXT SOURCE Pad A1 Pad A2 Pad A3 Pad A4 Pad A5 Pad A6 Pad A7 Pad A8 Pad B1 Pad B2 Pad B3 Pad B4 Pad B5 Pad B6 Pad B7 Pad B8 Pad C1 Pad C2 Pad C3 Pad C4 Pad C5 Pad C6 Pad C7 Pad C8 Pad D1 Pad D2 Pad D3 Pad D4 Pad D5 Pad D6 Pad D7 Pad D8 sCHANNEL MODE MESSAGE qAllSound Off (Controller Number 120) Status BnH Second 78H Third 00H n = MIDI Channel No. : 00H - 0FH (ch. 1 - ch. 16) Received over the MIDI channel set with MIDI Channel. * For instructions on setting MIDI channels, refer to "How to Change the MIDI Channel" in the Owner's Manual (p. 53). sSystem Common Message qSong Position Pointer Status F2H Second mmH Third nnH nn, mm = Song Position Point: 00H 00H - 7FH 7FH When the MIDI Sync mode is set to "AUTO SYNC, " this is received if the pattern is stopped. It sets the position from which the pattern is to be performed. For a two-byte signed number, 00 00H = -8192, 40 00H = +/-0, and 7F 7FH = +8191. For example the decimal expression of aa bbH would be aa bbH - 40 00H = (aa x 128 + bb - 64 x 128. Hexadecimal notation in two 4-bit units is used for data indicated as `nibbled'. The nibbled two-byte value of 0a 0b H would be a x 16 + b. qTiming Clock Status F8H Received while MIDI Sync mode is set to "AUTO SYNC" or "TEMPO SYNC, " this controls the performance tempo of the pattern. qStart Status FAH Received while MIDI Sync mode is set to "AUTO SYNC, " this starts the performance of the pattern. qContinue Status FBH Received while MIDI Sync mode is set to "AUTO SYNC, " this starts the performance of the pattern. qStop Status FCH Received while MIDI Sync mode is set to "AUTO SYNC, " this starts the performance of the pattern. 2. TRANSMITTED DATA The E-36 has no MIDI OUT connector, so no data is transmitted. * * <Example1> What is the decimal equivalent of 5AH?From the above table, 5AH = 90. <Example2> What is the decimal equivalent of the 7-bit hexadecimal values 12 34H?From the above table, 12H = 18 and 34H = 52 Thus, 18 x 128 + 52 = 2356 <Example3> What is the decimal equivalent of the nibbled expression 0A 03 09 0DH? [. . . ] From the above table, 5AH = 90. <Example2> What is the decimal equivalent of the 7-bit hexadecimal values 12 34H?From the above table, 12H = 18 and 34H = 52 Thus, 18 x 128 + 52 = 2356 <Example3> What is the decimal equivalent of the nibbled expression 0A 03 09 0DH? [. . . ]