User manual ROLAND EBAND JS-8

[. . . ] English Deutsch Français Owner's Manual Bedienungsanleitung Mode d'emploi Manuale dell'utente Manual de instrucciones Manual do Proprietário Gebruikershandleiding Italiano Español Português Nederlands G 6 0 2 7 1 3 4 - 0 1 For the U. K. IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE. BLUE: NEUTRAL BROWN: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. [. . . ] This features a more suppressed high end than MONO. This features a more suppressed high end than ST 1. This features a more suppressed high end than ST 2. TYPE ST 2 MN MLD ST1 MLD ST2 MLD This sets the speed of the effect. RATE When set to BPM, the value of the RATE parameter is set according to the value of the "EFFECT TEMPO" (p. This makes it easier to achieve effect sound settings that match the tempo of the song. This sets the volume level of the effect. DEPTH EFFECT LEVEL REVERB parameter list Parameter OFF/ON Turns the REVERB OFF/ON. Simulates an ambience mic (off-mic, placed at a distance from the sound source) used in recording and other applications. Rather than emphasizing the reverberation, this reverb is used to produce a sense of openness and depth. Simulates the reverberation in a small room. Simulates the reverberation in a concert hall. Provides clear and spacious reverberations. Simulates the reverberation in a concert hall. Simulates plate reverberation (a studio effect unit that uses the vibration of a large metal plate to produce reverberation). Provides a metallic sound with a distinct upper range. TYPE ROOM HALL 1 HALL 2 PLATE REVERB TIME HIGH CUT EFFECT LEVEL Adjusts the length (time) of reverberation. The high cut filter adjusts the amount of high frequencies in the reverb sound. When "FLAT" is selected, the high cut filter will have no effect. This sets the volume level of the effect. EZ CHARACTER parameter list Parameter EFFECT TEMPO EZ CHAR This sets the tempo when RATE parameters such as DELAY TIME, PHASER, and FLANGER are synchronized to the song tempo. Set DELAY TIME and RATE to (Whole Note)-(16th Note). You can also input the tempo by tapping [SPEED] in time with the beat (TAP function). This adjusts the character of the guitar tone, ranging from solo tone (-20) to a tone used for backing (+20). 30 Convenient Functions Adjusting the Guitar and Mic Input Sensitivity You can connect a mic to the JS-8's GUITAR/MIC IN jack and adjust the input sensitivity. 1. Select SYSTEM SETTING, and then press [ENTER]. · The JS-8 features an e ect especially designed for use with mics. To choose this e ect, select MIC from the e ect categories. [. . . ] 33 USB (COMPUTER) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 39 USB Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 USB MEMORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 39 W WAH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]