User manual ROLAND F-110

[. . . ] IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE. BLUE: NEUTRAL BROWN: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Under no circumstances must either of the above wires be connected to the earth terminal of a three pin plug. [. . . ] When you take your finger off the button, a list of all songs stored in the internal memory will appear and the [ ] button will flash. 3. Press the [­] button a number of times until the display reads "ALL. " 4. Press the [ ] button. ] button and The display will indicate "Sur, " and the [ [ ] button will flash. fig. d-Sur. eps_88 If you decide not to delete all songs, press the [ button. ] 43 Various Settings In Function mode you can make various settings for performance and recording. Button Function Dual Balance p. 48 [Split] (& [­] [+]) Page Basic Operation in Function Mode 1. Hold down the [Reverb] button and press the [Transpose] button. fig. F-110Function. eps_88 Octave Shift p. 52 Tonic The [Reverb] button and [Transpose] button will light. The display will indicate "Fnc" and you'll be in Function mode. fig. d-Fnc. eps_88 p. 53 [Piano] (& [­] [+]) Stretched Tuning p. Press one of the blinking buttons to select the setting you want to change. The display shows the name of the setting while you hold down the button. The value of the setting will appear when you release the button. String Resonance p. Use the [­] [+] buttons to change the setting. If you want to change a different setting, select the setting you want to change by pressing one of the buttons that were blinking before step 2. 3D Mode p. Press the [Reverb] or [Transpose] button to leave Function mode. The button indicators will return to their former state. The settings you change will return to their original state when you turn off the power. If you want your changes to be retained even after the power has been turned off, carry out the Memory Backup procedure (p. 59) to save the settings. 44 Various Settings Button Function Damper Pedal Part Page Sound-related Settings p. 51 Center Pedal Function [Strings] (& [­] [+]) Left Pedal Function p. 58 Composer MIDI Out [Others] (& [­] [+]) V-LINK Channel p. 43 [Song] (& [­] [+]) Transpose Mode p. 55 [Metronome] (& [­] [+]) Countdown Part p. 58 Adding Spatial Depth to the Sound (3D Sound Control) The F-110 provides a "3D Sound Control" function. This function adds the natural resonance and spaciousness that are characteristic of a grand piano. 1. [. . . ] Edwin Moses Road, Mumbai-400011, INDIA TEL: (022) 2493 9051 GERMANY Roland Elektronische Musikinstrumente HmbH. Oststrasse 96, 22844 Norderstedt, GERMANY TEL: (040) 52 60090 BRAZIL Roland Brasil Ltda. Rua San Jose, 211 Parque Industrial San Jose Cotia - Sao Paulo - SP, BRAZIL TEL: (011) 4615 5666 PANAMA SUPRO MUNDIAL, S. A. Boulevard Andrews, Albrook, Panama City, REP. [. . . ]