Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ROLAND FANTOM G6. We hope that this ROLAND FANTOM G6 user guide will be useful to you.
Lastmanuals help download the user guide ROLAND FANTOM G6.
You may also download the following manuals related to this product:
ROLAND FANTOM G6 SOUND LIST (1538 ko)
ROLAND FANTOM G6 QUICK START GUIDE (10205 ko)
ROLAND FANTOM G6 DRIVER INSTALLATION GUIDE (3162 ko)
ROLAND FANTOM G6 ANNEXE 595 QUICK START GUIDE (10242 ko)
ROLAND FANTOM G6 SOUND LIST-LIVE SET-STUDIO SET (266 ko)
Manual abstract: user guide ROLAND FANTOM G6
Detailed instructions for use are in the User's Guide.
[. . . ] WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
WARNING - When using electric products, basic precautions should always be followed, including the following: 1. Do not block any of the ventilation openings. [. . . ] Hi Damp 100010000 Hz Adjusts the frequency above which the highFreq frequency content of the reverb sound will be reduced, or "damped. " High 1100 % Adjusts the amount of damping applied to Damp the frequency range selected with HF Damp. With a setting of "100%, " there will be no reduction of the reverb's high-frequency content. High Cut 100010000 Hz Adjusts the frequency above which the highfrequency content of the reverb will be reduced.
Overview Sound 1 Sound 2 Sound 3 Pad Sequencer Sampler Menu/System Appendix
185
Effects List
Input Effect Parameters
Selects the type of effect that will be applied to the external input source.
05: NOISE SUPPRESSOR
Suppresses noise during periods of silence. Parameter
Threshold Release
Range
0127 0127
Explanation
Volume at which noise suppression will begin Time from when noise suppression begins until the volume reaches zero.
01: EQUALIZER
Adjusts the tone of the low-frequency and high-frequency ranges. Parameter
Low Freq Low Gain High Freq High Gain
Range
200, 400 Hz -15 +15 dB 2000, 4000, 8000 Hz -15 +15 dB
Explanation
Center frequency of the low-frequency range Amount of low-frequency boost/cut Center frequency of the highfrequency range Amount of high-frequency boost/cut
06: CENTER CANCELER
Removes the sounds that are localized at the center of the stereo input. This is a convenient way to eliminate a vocal. Parameter
Ch Balance
Range
-50 +50
Explanation
Volume balance of the L (left) and R (right) channels for removing the sound Lower frequency limit of the band to be removed Upper frequency limit of the band to be removed
02: ENHANCER
Modifies the harmonic content of the high-frequency range to add sparkle to the sound. Parameter
Sens Mix
Range Low Range High
1615000 Hz 1615000 Hz1
Range
0127 0127
Explanation
Depth of the enhancer effect Volume of the harmonics that are generated
03: COMPRESSOR
Restrains high levels and boosts low levels to make the overall volume more consistent. Parameter
Attack
Range
0127
Explanation
Time from when the input exceeds the Threshold until the volume begins to be compressed Volume level at which compression will begin Level of the output sound
Threshold Post Gain
0127 0 +18 dB
04: LIMITER
Compresses the sound when it exceeds a specified volume, to keep distortion from occurring. Parameter
Release
Range
0127
Explanation
Time from when the input falls below the Threshold until compression ceases Volume level at which compression will begin Level of the output sound
Threshold Post Gain
0127 0 +18 dB
186
05: Pads (Using the Pads)
This chapter explains how to use the pads.
Using the Pads
Common Operations for Pads
Switching the Pad Mode (PAD MODE)
You can strike the Fantom-G's pads to play samples, rhythms, or phrases, or you can use the pads as sixteen switches to turn various parameters on/off. The pads can operate in one of sixteen modes. Press [PAD MODE] to switch the pad mode. The pad mode window will appear in the screen. [PAD MODE] will blink, and the currently selected pad mode (pad [1][16]) will blink.
Using the Pads as Numeric Keys (NUMERIC)
If you press the pad [NUMERIC] button to make it light, the pads will act as numeric keys. "Using the pad for numeric input" (p. 41)
Using the Hold Function to Sustain the Sounds (HOLD)
By using the Hold function, you can make the sound continue even after you take your finger off the pad. This is convenient when you want a sound to continue, such as a phrase that you want to loop (play repeatedly).
If you decide not to switch the pad mode, press [PAD MODE] once again. [PAD MODE] will go dark, and you'll return to the previous state. For details about operation in each pad mode, refer to the table below and the corresponding reference pages.
Pad number 1 2 3
Pad mode SAMPLE PAD RHYTHM CHORD MEMORY Explanation The pads play a sample set The pads play a rhythm set The pads switch chord form for the Chord Memory function (p. 81) The pads switch styles for the Arpeggio function (p. 78) The pads play phrases The pads play rhythm patterns The pads act as tone select and on/off switches The pads switch muting on/off for sequencer tracks The pads recall frequency-used screens that you've registered The pads act as on/off switches for external MIDI transmit channels (116) The pads switch the effects (other than the patch multi-effects) The pads switch the patch multieffect for each part The pads select parts (116) and banks (INT/EXP1/EXP2/EXT) The pads switch muting on/off for parts (116) and banks (INT/ EXP1/EXP2) The pads register/recall patches, live sets, or studio sets from the user group The pads register/recall Favorite settings Page p. 193
The Hold function is available only if the pad mode is 1 SAMPLE PAD or 2 RHYTHM.
Sustaining a sound while you play other sounds
1. [. . . ] 45-1, Block C2, Jalan PJU 1/39, Dataran Prima, 47301 Petaling Jaya, Selangor, MALAYSIA TEL: (03) 7805-3263
IRELAND
Roland Ireland G2 Calmount Park, Calmount Avenue, Dublin 12 Republic of IRELAND TEL: (01) 4294444
U. Eastern Avenue Los Angeles, CA 90040-2938, U. TEL: (323) 890 3700
COSTA RICA
JUAN Bansbach Instrumentos Musicales Ave. 1. Calle 11, Apartado 10237, San Jose, COSTA RICA TEL: 258-0211
TRINIDAD
AMR Ltd Ground Floor Maritime Plaza Barataria Trinidad W. I. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ROLAND FANTOM G6
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ROLAND FANTOM G6 will begin.