User manual ROLAND FANTOM-X AUDIO TRACK EXPANSION

[. . . ] Guide to the Added Functionality 201a Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, this guide should be read in its entirety. This guide should be saved and kept on hand as a convenient reference. This guide applies to the Fantom-X6, the Fantom-X7, the Fantom-X8 (this guide uses the term "Fantom-X" to indicate all these three models), and FANTOM-X Audio Track Expansion Kit. [. . . ] In the Audio Track Edit screen, mute any audio tracks that you don't want to merge. The [REC] indicator will blink, and the Audio Rec Standby window will appear. In the Audio Rec Mode (Audio Recording Mode) field, choose "AUDIO MERGE. " Use [CURSOR] to move the cursor, and turn the VALUE dial or use [INC][DEC] to make the setting. fig. 02-27_40 fig. 02-29_40 Use [RESET][BWD][FWD] or [CURSOR] to specify the location to which the sample event is to be assigned. Press [F8 (Assign)] to assign the sample event to the audio track. A sample event that plays the recorded sample will be assigned to the audio track, and you will return to the previous screen. · If you press [F6 (Unload)], the samples you just recorded will be deleted (unloaded). A message will ask you for confirmation; press [F8 (Exec)] to confirm. · If you want to neither assign nor unload the sample, press [F7 (Cancel)]. * Even if you cancel, the recorded sample data itself will remain in the sample list. 2. 4. In the Audio Rec Count In (Audio Recording Count In) field, specify how you want recording to start. Refer to step 3 of "Recording an audio track (SOLO/RE-SAMPLING)" (p. 24). 5. When you've finished making settings in the Audio Rec Standby window, press [PLAY] or [F8 (Start)]. The Audio Rec Standby window will close, the [REC] indicator will change from blinking to steadily lit, and recording will start. 25 Using audio tracks When recording starts, the Audio Recording window will appear. fig. 02-28_40 Saving your audio tracks When you save a song that contains audio tracks, the audio track data is automatically saved in a file with a filename extension of ". SVA" and the same name as the song, together with the identically named ". SVQ" data file. To close the Audio Recording window, press [F8 (Close)] or [PLAY]. When you've finished recording, press [STOP]. The Audio Rec Sample Assign window will open. Owner's Manual; p. 223 fig. 02-02 fig. 02-31_40 (User, Card) ROLAND PNL SEQ SNG (. SVQ, . SVA) SMPL SND TMP AUDIO_IMPORT BMP PATCH_IMPORT TEXT System Setup (Owner's Manual; p. 198) includes the following audio tracks' parameters. · · · · Level Pan Reverb Send Chorus Send · Output Assign · Mute/Solo · Key Shift The location at which the recorded sample event is to be assigned will blink. Use [RESET][BWD][FWD] or [CURSOR] to specify the location at which you want to assign the sample event. Press [F8 (Assign)] to assign the sample event to the audio track. A sample event that plays the recorded sample will be assigned to the audio track, and you will return to the previous screen. · If you press [F6 (Unload)], the samples you just recorded will be deleted (unloaded). A message will ask you for confirmation; press [F8 (Exec)] to confirm. [. . . ] 41, 46 Patch Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Patch Overview Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 PC Mode Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Performance Layer Screen . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]