User manual ROLAND FR-7XB

[. . . ] r® Owner's Manual WARNING ­ To reduce the risk of fire or electric shock, do not expose this device to rain or moisture. CAUTION The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS. IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS WARNING ­ When using electric products, basic precautions should always be followed, including the following: Read these instructions. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. [. . . ] You need to select another treble register whose "Bass Link" function is on for the link to work. Note: The Orchestra Chord and Orchestra Free Bass Link functions need to bee activated/deactivated using the "Bass Link" procedure. There is no separate switching function for the Orchestra Chord or Orchestra Free Bass section. 2. 14 Orchestra Chord Link This parameter that allows you to specify which Orchestra Chord or Orchestra Free Bass sound is selected whenever you press the treble register you are currently editing. The Orchestra Chord and Orchestra Free Bass sections are mutually exclusive (there are no chord buttons in Free Bass mode). · CHORD-FREE BS: No Link, name of the selected 1~7 register (the FR-7x allows you to name each register) The options depend on the "2. 12 Bass Link" setting, because the ORCH CHORD and ORCH FREE BASS sections are not always available: "2. 12 Bass Link" Possibilities for "2. 14 Orchestra Chord Link" setting Repeat this procedure to defeat the Bass Link function if you no longer need it (or assign "CANCEL" to another Treble register and press it). On the main page, links are indicated as by means of white arrows: No Link Bass 1~7 Free 1~7 No Link, name of the selected 1~7 register No Link, name of the selected CHD1~7 register No Link, name of the selected FBS1~7 register 69 FR-7x V-Accordion ® 2. Treble Edit parameters (Advanced) 2. 15 MIDI TX This page contains a series of MIDI parameters for the selected register. See page 113 for details about the MIDI parameters. These parameters are saved along with all other Set parameters, which allows you to use different MIDI settings for each Set ­ and even each register within a Set. (e) Press the [EXIT÷JUMP] button to switch off the [Del] function. Inserting characters To insert a missing character, proceed as follows: (a) Press the [DATA÷ENTER] knob and rotate it to select the character position that should follow the character you are about to insert. (b) Press the [EXIT÷JUMP] button to select [Ins]. 2. 16 Name This parameter allows you to name the currently selected treble register for easy reference while performing with the FR-7x. The procedure is as follows: (1) Press the [DATA÷ENTER] knob and rotate it to select the character position you want to change. (2) Press the [DATA÷ENTER] knob again to activate the character position for editing. (c) Press the [DATA÷ENTER] knob to insert a new position, then rotate the knob to select the desired character for that position. (d) Press the [EXIT÷JUMP] button to switch off the [Ins] function. The name is displayed black-on-white now. The black underline character indicates the character position you can change. (3) Rotate the [DATA÷ENTER] knob to select the desired character. (4) Confirm your selection by pressing the [DATA÷ENTER] knob (the name is displayed whiteon-black again). (5) Rotate the [DATA÷ENTER] knob to select another character position, then repeat steps (2)~(4) to complete your name. Deleting characters To delete characters you no longer need, proceed as follows: (a) If the name is displayed black-on-white, press the [DATA÷ENTER] knob. (b) Rotate the [DATA÷ENTER] knob to select the character you want to delete. (c) Press the [EXIT÷JUMP] button and rotate the [DATA÷ENTER] knob to select [Del]. r (d) Press the [DATA÷ENTER] knob to delete the selected character. 70 V-Accordion r 3. 1 Reed Type (Advanced) 3. [. . . ] C. , V6V 2M4 CANADA TEL: (604) 270 6626 Roland Canada Ltd. (Toronto Office) 170 Admiral Boulevard Mississauga On L5T 2N6 CANADA TEL: (905) 362 9707 CHILE Comercial Fancy II S. A. Rut. : 96. 919. 420-1 Nataniel Cox #739, 4th Floor Santiago - Centro, CHILE TEL: (02) 688-9540 PARAGUAY Distribuidora De Instrumentos Musicales J. E. Manduvira Asuncion PARAGUAY TEL: (595) 21 492147 MIDDLE EAST BAHRAIN Moon Stores No. 1231&1249 Rumaytha Building Road 3931, Manama 339 BAHRAIN TEL: 17 813 942 KOREA Cosmos Corporation 1461-9, Seocho-Dong, Seocho Ku, Seoul, KOREA TEL: (02) 3486-8855 HUNGARY Roland East Europe Ltd. [. . . ]