User manual ROLAND HP-101E

[. . . ] No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING - When using electric products, basic precautions should always be followed, including the following: 1. [. . . ] The key touch is set to "Medium" when the instrument is turned on. Key Pressed Settings Fortissimo (ff) can be produced by playing less strongly than usual, making the keyboard feel lighter. This setting makes it easy to play, even for children. This allows you to play using the most natural touch. This is the closest to the touch of an acoustic piano. Fortissimo (ff) cannot be produced unless you play more strongly than usual, making the keyboard feel heavier. Dynamic fingering adds even more feeling to what you play. Sounds at a fixed volume, regardless of your keyboard playing strength. Hold down the [Metronome] and [Reverb/Key Touch] buttons, and press the key for the note you want to set as the tonic. keys for Setting the Transposition: C5­B5 The keyboard will be transposed. For example, if you want the E pitch to sound when you play the C key, hold down the [Metronome] and [Reverb/ Key Touch] buttons and press the E5 key. This setting returns to the original value (0) when you turn off the power. To cancel the transposition, hold down the [Metronome] and [Reverb/Key Touch] buttons and press the "C5" key (transposition 0). Simultaneously playing two tones when one key is pressed is called "Dual play. Holding down the [Tone] and [Metronome] buttons and pressing the "D#" key raises the Dual Tone volume. To restore the depth of the reverb effect at the time the power is turned on, hold down the [Tone] and [Metronome] buttons and press both the "C#" and "D#" keys simultaneously. You can change the Dual Balance by pressing any "C#" or "D#" key. Hold down the [Tone] button and press a key to which a tone is assigned to select the fundamental tone (p. Another tone (the Dual Tone) is played together with the tone selected in Step 1. Hold down the [Tone] and [Metronome] buttons, and press either the "A0, " "B0, " or "C1" key. The beat is set to "weak beats only" when the power is turned on. When the beat is set to "weak beats only, " the [Metronome] button only flashes in green. [. . . ] consult your Roland dealer or nearest Roland Service Center. The volume level of the instrument connected to Input jacks is too low Could you be using a connection cable that contains a resistor?Use a connection cable that does not contain a resistor. A High-pitched whine is produced When listening through headphones: Some of the more flamboyant and effervescent piano tones feature an ample high-end component, which may make the sound appear to have metallic reverberation added. [. . . ]