User manual ROLAND HP-5500

[. . . ] (Initial value is ON) For Drum Parts, not received when Rx. NOTE ON = OFF for each Instrument. n = MIDI channel number : 0H-FH (ch. 1-ch. 16) vv = Volume : 00H-7FH (0-127), Initial Value = 64H (100) * * Volume messages are used to adjust the volume balance of each Part. (Initial value is ON) Pan (Controller number 10) q Polyphonic Key Pressure Status AnH 2nd bytes kkH 3rd byte vvH Status BnH 2nd bytes 0AH 3rd byte vvH n = MIDI channel number : 0H-FH (ch. 1-ch. 16) kk = note number : 00H-7FH (0-127) vv = key pressure : 00H-7FH (0-127) * * Not received when Rx. POLY PRESSURE (PAf) = OFF. (Initial value is ON) The resulting effect is determined by System Exclusive messages. With the initial settings, there will be no effect. n = MIDI channel number : 0H-FH (ch. 1-ch. 16) vv = pan : 00H-40H-7FH (Left-Center-Right), Initial Value = 40H (Center) * * For Rhythm Parts, this is a relative adjustment of each Instrument's pan setting. [. . . ] 00: Room 1 04 Hall 2 01: Room 2 02: Room 3 03: Hall 1 04: Hall 2 05: Plate 06: Delay 07: Panning Delay 40 01 31 00 00 01 00-07 REVERB CHARACTER 0-7 04 4 40 01 32 00 00 01 00-07 REVERB PRE-LPF 0-7 00 0 40 01 33 00 00 01 00-7F REVERB LEVEL 0-127 40 64 40 01 34 00 00 01 00-7F REVERB TIME 0-127 40 64 40 01 35 00 00 01 00-7F REVERB DELAY FEEDBACK 0-127 00 0 * REVERB MACRO is a macro parameter that allows global setting of reverb parameters. When you select the reverb type with REVERB MACRO, each reverb parameter will be set to the most suitable value. * REVERB CHARACTER is a parameter that changes the reverb algorithm. The value of REVERB CHARACTER corresponds to the REVERB MACRO of the same number. 00: Chorus 1 02 Chorus 3 01: Chorus 2 02: Chorus 3 03: Chorus 4 04: Feedback Chorus 05: Flanger 06: Short Delay 07: Short Delay (FB) 40 01 39 00 00 01 00-07 CHORUS PRE-LPF 0-7 00 0 40 01 3A 00 00 01 00-7F CHORUS LEVEL 0-127 40 64 40 01 3B 00 00 01 00-7F CHORUS FEEDBACK 0-127 08 8 40 01 3C 00 00 01 00-7F CHORUS DELAY 0-127 50 80 40 01 3D 00 00 01 00-7F CHORUS RATE 0-127 03 3 40 01 3E 00 00 01 00-7F CHORUS DEPTH 0-127 13 19 40 01 3F 00 00 01 00-7F CHORUS SEND LEVEL TO REVERB 0-127 00 0 * CHORUS MACRO is a macro parameter that allows global setting of chorus parameters. When you use CHORUS MACRO to select the chorus type, each chorus parameter will be set to the most suitable value. 40 01 38 00 00 01 00-07 CHORUS MACRO 40 01 30 00 00 01 00-07 REVERB MACRO 7 HP 555G MIDI Implementation q Part Parameters HP555G has 16 parts. Parameters that can be set individually for each Part are called Part parameters. If you use exclusive messages to set Part parameters, specify the address by Block number rather than Part Number (normally the same number as the MIDI channel). The Block number can be specified as one of 16 blocks, from 0 (H) to F (H). The relation between Part number and Block number is as follows. BANK SELECT is set to ON by power-on or by receiving "GS RESET, " and will be set OFF when "Turn General MIDI System On" is received. ON (OFF*) 8 HP 555G MIDI Implementaion Address (H) Size (H) Data (H) Parameter 40 1x 24 00 00 01 00-01 Rx. BANK SELECT LSB * HP555G can be recognise Bank Select LSB (40H-43H) even if this message is OFF. 40 1x 25 40 1x 28 40 1x 29# 40 1x 30 40 1x 31 40 1x 32 40 1x 33 40 1x 34 40 1x 35 40 1x 36 40 1x 37 00 00 01 00 00 03 00-01 00-7F TONE REMAIN Bank Select LSB Range Description OFF/ON Default Value (H) 00 Description OFF OFF/ON LSB (from) LSB (to) 01 40 43 40 40 40 40 40 40 40 40 ON 40H 43H 0 0 0 0 0 0 0 0 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 0E-72 0E-72 0E-72 0E-72 0E-72 0E-72 0E-72 0E-72 TONE MODIFY 1 -50 - +50 Vibrato rate (= NRPN# 8) TONE MODIFY 2 -50 - +50 Vibrato depth (= NRPN# 9) TONE MODIFY 3 -50 - +50 TVF cutoff frequency (= NRPN# 32) TONE MODIFY 4 -50 - +50 TVF resonance (= NRPN# 33) TONE MODIFY 5 -50 - +50 TVF&TVA Env. attack (= NRPN# 99) TONE MODIFY 6 -50 - +50 TVF&TVA Env. decay (= NRPN# 100) TONE MODIFY 7 -50 - +50 TVF&TVA Env. release (= NRPN# 102) TONE MODIFY 8 -50 - +50 Vibrato delay (= NRPN# 10) 40 1x 40 00 00 0C 00-7F SCALE TUNING C -64 - +63 [cent] 40 0 [cent] 40 1x 41# 00-7F SCALE TUNING C# -64 - +63 [cent] 40 0 [cent] 40 1x 42# 00-7F SCALE TUNING D -64 - +63 [cent] 40 0 [cent] 40 1x 43# 00-7F SCALE TUNING D# -64 - +63 [cent] 40 0 [cent] 40 1x 44# 00-7F SCALE TUNING E -64 - +63 [cent] 40 0 [cent] 40 1x 45# 00-7F SCALE TUNING F -64 - +63 [cent] 40 0 [cent] 40 1x 46# 00-7F SCALE TUNING F# -64 - +63 [cent] 40 0 [cent] 40 1x 47# 00-7F SCALE TUNING G -64 - +63 [cent] 40 0 [cent] 40 1x 48# 00-7F SCALE TUNING G# -64 - +63 [cent] 40 0 [cent] 40 1x 49# 00-7F SCALE TUNING A -64 - +63 [cent] 40 0 [cent] 40 1x 4A# 00-7F SCALE TUNING A# -64 - +63 [cent] 40 0 [cent] 40 1x 4B# 00-7F SCALE TUNING B -64 - +63 [cent] 40 0 [cent] * SCALE TUNING is a function that allows fine adjustment to the pitch of each note in the octave. The pitch of each identically-named note in all octaves will change simultaneously. A setting of ±fi0 cent (40H) is equal temperament. Supplementary material, "The Scale Tune Feature"(p-13). 40 2x 00 40 2x 01 40 2x 02 40 2x 03 40 2x 04 40 2x 05 40 2x 06 40 2x 07 40 2x 08 40 2x 09 40 2x 0A 40 2x 10 40 2x 11 40 2x 12 40 2x 13 40 2x 14 40 2x 15 40 2x 16 40 2x 17 40 2x 18 40 2x 19 40 2x 1A 40 2x 20 40 2x 21 40 2x 22 40 2x 23 40 2x 24 40 2x 25 40 2x 26 40 2x 27 40 2x 28 40 2x 29 40 2x 2A 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 40-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F MOD PITCH CONTROL MOD TVF CUTOFF CONTROL MOD AMPLITUDE CONTROL MOD LFO1 RATE CONTROL MOD LFO1 PITCH DEPTH MOD LFO1 TVF DEPTH MOD LFO1 TVA DEPTH MOD LFO2 RATE CONTROL MOD LFO2 PITCH DEPTH MOD LFO2 TVF DEPTH MOD LFO2 TVA DEPTH -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] 40 40 40 40 0A 00 00 40 00 00 00 42 40 40 40 00 00 00 40 00 00 00 40 40 40 40 00 00 00 40 00 00 00 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 47 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 2 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] BEND PITCH CONTROL 0-24 [semitone] BEND TVF CUTOFF CONTROL -9600 - +9600 [cent] BEND AMPLITUDE CONTROL -100. 0 - +100. 0 [%] BEND LFO1 RATE CONTROL -10. 0 - +10. 0 [Hz] BEND LFO1 PITCH DEPTH 0-600 [cent] BEND LFO1 TVF DEPTH 0-2400 [cent] BEND LFO1 TVA DEPTH 0-100. 0 [%] BEND LFO2 RATE CONTROL -10. 0 - +10. 0 [Hz] BEND LFO2 PITCH DEPTH 0-600 [cent] BEND LFO2 TVF DEPTH 0-2400 [cent] BEND LFO2 TVA DEPTH 0-100. 0 [%] CAf PITCH CONTROL CAf TVF CUTOFF CONTROL CAf AMPLITUDE CONTROL CAf LFO1 RATE CONTROL CAf LFO1 PITCH DEPTH CAf LFO1 TVF DEPTH CAf LFO1 TVA DEPTH CAf LFO2 RATE CONTROL CAf LFO2 PITCH DEPTH CAf LFO2 TVF DEPTH CAf LFO2 TVA DEPTH -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] 9 HP 555G MIDI Implementation Address (H) 40 2x 30 40 2x 31 40 2x 32 40 2x 33 40 2x 34 40 2x 35 40 2x 36 40 2x 37 40 2x 38 40 2x 39 40 2x 3A 40 2x 40 40 2x 41 40 2x 42 40 2x 43 40 2x 44 40 2x 45 40 2x 46 40 2x 47 40 2x 48 40 2x 49 40 2x 4A 40 2x 50 40 2x 51 40 2x 52 40 2x 53 40 2x 54 40 2x 55 40 2x 56 40 2x 57 40 2x 58 40 2x 59 40 2x 5A Size (H) 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 Data (H) 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F Parameter PAf PITCH CONTROL PAf TVF CUTOFF CONTROL PAf AMPLITUDE CONTROL PAf LFO1 RATE CONTROL PAf LFO1 PITCH DEPTH PAf LFO1 TVF DEPTH PAf LFO1 TVA DEPTH PAf LFO2 RATE CONTROL PAf LFO2 PITCH DEPTH PAf LFO2 TVF DEPTH PAf LFO2 TVA DEPTH CC1 PITCH CONTROL CC1 TVF CUTOFF CONTROL CC1 AMPLITUDE CONTROL CC1 LFO1 RATE CONTROL CC1 LFO1 PITCH DEPTH CC1 LFO1 TVF DEPTH CC1 LFO1 TVA DEPTH CC1 LFO2 RATE CONTROL CC1 LFO2 PITCH DEPTH CC1 LFO2 TVF DEPTH CC1 LFO2 TVA DEPTH CC2 PITCH CONTROL CC2 TVF CUTOFF CONTROL CC2 AMPLITUDE CONTROL CC2 LFO1 RATE CONTROL CC2 LFO1 PITCH DEPTH CC2 LFO1 TVF DEPTH CC2 LFO1 TVA DEPTH CC2 LFO2 RATE CONTROL CC2 LFO2 PITCH DEPTH CC2 LFO2 TVF DEPTH CC2 LFO2 TVA DEPTH Description -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] Default Value (H) 40 40 40 40 00 00 00 40 00 00 00 40 40 40 40 00 00 00 40 00 00 00 40 40 40 40 00 00 00 40 00 00 00 Description 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] q Drum Setup Parameters * * m: Map number (0 = MAP1, 1 = MAP2) rr: drum part note number (00H-7FH) Size (H) 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 Data (H) 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-01 00-01 Parameter Description PLAY NOTE NUMBER Pitch coarse LEVEL TVA level (= NRPN# 26) ASSIGN GROUP NUMBER Non, 1-127 PANPOT -64 (RANDOM), -63 (LEFT) - +63 (RIGHT) (= NRPN# 28, except RANDOM) REVERB SEND LEVEL 0. 0-1. 0 (= NRPN# 29) Multiplicand of the part reverb depth CHORUS SEND LEVEL 0. 0-1. 0 (= NRPN# 30) Multiplicand of the part chorus depth Rx. NOTE ON OFF/ON Address (H) 41 m1 rr 41 m2 rr 41 m3 rr 41 m4 rr 41 m5 rr 41 m6 rr 41 m7 rr 41 m8 rr * When the Drum Set is changed, DRUM SETUP PARAMETER values will all be initialized. 10 HP 555G MIDI Implementation Section 4. Supplementary material q Decimal and Hexadecimal table In MIDI documentation, data values and addresses/sizes of exclusive messages etc. are expressed as hexadecimal values for each 7 bits. The following table shows how these correspond to decimal numbers. +------------+------------++------------+------------++------------+------------++------------+------------+ | Dec. [. . . ] 41H + 02H + 4BH + 00H + 00H + 01H = 65 + 2 + 75 + 0 + 0 + 1 = 143 (sum) 143 (sum) / 128 = 1 (quotient) . . . 15 (remainder) checksum = 128 - 15 (remainder) = 113 = 71H This means that F0 41 10 42 11 41 02 4B 00 00 01 71 F7 is the message we transmit. q About tuning In MIDI, individual Parts are tuned by sending RPN #1 (Master Fine Tuning) to the appropriate MIDI channel. In MIDI, an entire device is tuned by either sending RPN #1 to all MIDI channels being used, or by sending a System Exclusive MASTER TUNE (address 40 00 00H). RPN #1 allows tuning to be specified in steps of approximately 0. 012 cents (to be precise, 100/8192 cent), and System Exclusive MASTER TUNE allows tuning in steps of 0. 1 cent. [. . . ]