User manual ROLAND HP-555G V1.00 MIDI IMPLEMENTATION

[. . . ] MIDI IMPLEMENTATION Model: HP555G Date: Jan. 1. 1998 Version: 1. 00 Section 1. Receive data s Channel Voice Messages q Note off Status 8nH 9nH 2nd byte kkH kkH 3rd byte vvH 00H Portamento Time (Controller number 5) Status BnH 2nd bytes 05H 3rd byte vvH n = MIDI channel number : 0H-FH (ch. 1-ch. 16) vv = Portamento Time : 00H-7FH (0-127), Initial value = 00H (0) * This adjusts the rate of pitch change when Portamento is ON or when using the Portamento Control. A value of 0 results in the fastest change. n = MIDI channel number : 0H-FH (ch. 1-ch. 16) kk = note number : 00H-7FH (0-127) vv = note off velocity : 00H-7FH (0-127) * * For Drum Parts, these messages are received when Rx. NOTE OFF = ON for each Instrument. The velocity values of Note Off messages are ignored. Data Entry (Controller number 6, 38) Status BnH BnH 2nd bytes 06H 26H 3rd byte mmH llH n = MIDI channel number : 0H-FH (ch. 1-ch. 16) mm, ll = the value of the parameter specified by RPN/NRPN q Note on Status 9nH 2nd bytes kkH 3rd byte vvH Volume (Controller number 7) Status BnH 2nd bytes 07H 3rd byte vvH n = MIDI channel number : 0H-FH (ch. 1-ch. 16) kk = note number : 00H-7FH (0-127) vv = note on velocity : 01H-7FH (1-127) * * Not received when Rx. NOTE MESSAGE = OFF. [. . . ] VALUE 1-128 00 1 40 1x 02 00 00 01 00-10 Rx. CHANNEL 1-16, OFF Same as the Part Number 40 1x 03 00 00 01 00-01 Rx. PITCH BEND OFF/ON 01 ON 40 1x 04 00 00 01 00-01 Rx. CH PRESSURE (CAf) OFF/ON 01 ON 40 1x 05 00 00 01 00-01 Rx. PROGRAM CHANGE OFF/ON 01 ON 40 1x 06 00 00 01 00-01 Rx. CONTROL CHANGE OFF/ON 01 ON 40 1x 07 00 00 01 00-01 Rx. POLY PRESSURE (PAf) OFF/ON 01 ON 40 1x 08 00 00 01 00-01 Rx. NOTE MESSAGE OFF/ON 01 ON 40 1x 09 00 00 01 00-01 Rx. RPN OFF/ON 01 ON 40 1x 0A 00 00 01 00-01 Rx. NRPN is set to OFF by power-on or by receiving "Turn General MIDI System On, " and it will be set ON when "GS RESET" is received. 40 1x 0B 40 1x 0C 40 1x 0D 40 1x 0E 40 1x 0F 40 1x 10 40 1x 11 40 1x 12 40 1x 13 40 1x 14 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00-01 00-01 00-01 00-01 00-01 00-01 00-01 00-01 00-01 00-02 Rx. SOFT MONO/POLY MODE (= CC# 126 01 / CC# 127 00) ASSIGN MODE OFF/ON OFF/ON OFF/ON OFF/ON OFF/ON OFF/ON OFF/ON OFF/ON Mono/Poly 01 01 01 01 01 01 01 01 01 ON ON ON ON ON ON ON ON Poly * 0 = SINGLE 00 at x = 0 SINGLE at x = 0 1 = LIMITED-MULTI 01 at x 0 LIMITED-MULTI at x 0 2 = FULL-MULTI ASSIGN MODE is the parameter that determines how voice assignment will be handled when sounds overlap on identical note numbers in the same channel (i. e. , repeatedly struck notes). This is initialized to a mode suitable for each Part, so for general purposes there is no need to change this. 0 = OFF 00 at x 0 OFF at x 0 1 = MAP1 01 at x = 0 MAP1 at x 0 2 = MAP2 This parameter sets the Drum Map of the Part used as the Drum Part. HP555G can simultaneously (in different Parts) use up to two Drum Maps (MAP1, MAP2). With the initial settings, Part10 (MIDI CH = 10, x = 0) is set to MAP1 (1), and other Parts are set to normal instrumental Parts (OFF (0)). 00 00 01 00-02 USE FOR RHYTHM PART 40 1x 15 * 40 1x 16 00 00 01 28-58 PITCH KEY SHIFT -24 - +24 [semitones] 40 0 [semitones] 40 1x 17 00 00 02 08-F8 PITCH OFFSET FINE -12. 0 - +12. 0 [Hz] 08 00 0 [Hz] 40 1x 18# Use nibblized data. * PITCH OFFSET FINE allows you to alter, by a specified frequency amount, the pitch at which notes will sound. This parameter differs from the conventional Fine Tuning (RPN #1) parameter in that the amount of frequency alteration (in Hertz) will be identical no matter which note is played. When a multiple number of Parts, each of which has been given a different setting for PITCH OFFSET FINE, are sounded by means of an identical note number, you can obtain a Celeste effect. 40 1x 19 40 1x 1A 40 1x 1B 40 1x 1C 40 1x 1D 40 1x 1E 40 1x 1F 40 1x 20 40 1x 21 40 1x 22 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-5F 00-5F 00-7F 00-7F PART LEVEL (= CC# 7) VELOCITY SENSE DEPTH VELOCITY SENSE OFFSET PART PANPOT (= CC# 10, except RANDOM) KEY RANGE LOW KEY RANGE HIGH CC1 CONTROLLER NUMBER CC2 CONTROLLER NUMBER CHORUS SEND LEVEL (= CC# 93) REVERB SEND LEVEL (= CC# 91) 0-127 64 100 64 64 0 (CENTER) C-1 G9 16 17 0 40 0-127 40 0-127 40 -64 (RANDOM), -63 (LEFT) - +63 (RIGHT) 40 (C-1)-(G9) (C-1)-(G9) 0-95 0-95 0-127 0-127 00 7F 10 11 00 28 40 1x 23 00 00 01 00-01 Rx. BANK SELECT is set to ON by power-on or by receiving "GS RESET, " and will be set OFF when "Turn General MIDI System On" is received. ON (OFF*) 8 HP 555G MIDI Implementaion Address (H) Size (H) Data (H) Parameter 40 1x 24 00 00 01 00-01 Rx. BANK SELECT LSB * HP555G can be recognise Bank Select LSB (40H-43H) even if this message is OFF. [. . . ] The values of RPN #1 (Master Fine Tuning) and System Exclusive MASTER TUNE are added together to determine the actual pitch sounded by each Part. Frequently used tuning values are given in the following table for your reference. Values are in hexadecimal (decimal in parentheses). +----------------+----------------+----------------------------+--------------------------------------+ |Hz in A4| cent | RPN #1 | Sys. Ex. [. . . ]