User manual ROLAND HP204

[. . . ] HP204 Owner's Manual WARNING ­ To reduce the risk of fire or electric shock, do not expose this device to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS. IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS WARNING ­ When using electric products, basic precautions should always be followed, including the following: Read these instructions. Do not block any of the ventilation openings. [. . . ] 61). 50 Recording Recording Your Keyboard Performance Here's how to record just your own keyboard performance without using an internal song. fig. Panel-RecNew-e. eps Performance Settings 1. fig. d-USr. eps Press the [Int Song/Ext Song] button. If the display does not show the following, press the [Int Song/Ext Song] button until this indication appears. Alternatively, you can get "USr" to be displayed by holding down the [Int Song/Ext Song] button and pressing the [ ] button. 2. If necessary, sound the metronome. Press the [Metronome] button (p. While listening to the metronome, adjust the song tempo and the time signature as desired (p. 38). Settings for Recording 4. Press the [ ] button. The [ ] button lights, the [ ] button begins flashing, and the HP204 is put into recording standby. If you decide not to record, press the [ ] button once again. 51 Recording Starting Recording 5. Press the [ ] button or play the keyboard. ] button). In this After two measures of count sound, recording begins. Recording starts when you start playing the keyboard (without pressing the [ case, a count is not sounded. When recording begins, the [ ] button and [ ] button will light. During the count-in, the count measure is indicated in the display as "-2" then "-1. " Stopping Recording 6. Press the [ Recording will stop. ] button. Listening to the Recorded Performance 7. 8. Press the [ ] button. You will return to the beginning of the performance you recorded. Press the [ ] button. The recorded performance will play back. If you press the [ ] button while the metronome is sounding, there will be a twomeasure count ("count-in") before playback begins. 9. Press the [ NOTE ] button once again to stop playback. The recorded performance will disappear when you turn off the power. If you want to keep the performance you recorded, you must save it in internal memory or USB memory. If you have not saved the performance you recorded, you won't be able to play back another song. 61) the performance before playing back another song. NOTE 52 Recording Recording Your Performance Separately for Each Hand The HP204 recorder has three track buttons. You can record the performance of each hand separately to different track buttons (for example, the left-hand performance to the [Left] button and the right-hand performance to the [Right] button), or you can re-record just a specific track of a previously recorded performance. How the track buttons correspond to the recorded performances The recorded performances are assigned to the track buttons as follows. Split performance (p. 36) Track button [Right] button [Left] button Right-hand tone Left-hand tone Recorded performance Normal performance (the entire keyboard plays a single tone), Dual performance (p. 34) · When you record with just one recording track specified The performance will be recorded on the specified track. · When you record with multiple recording tracks specified Recording will take place in this order of priority: [Right] button [Left] button [Accomp] button. fig. Panel-RecTrack-e. eps Settings for recording 1. fig. d-USr. eps Press the [Int Song/Ext Song] button. If the display does not show the following, press the [Int Song/Ext Song] button until this indication appears. 53 Recording 2. Press the [ ] button. The [ ] button will light, the [ ] button indicator will flash, and the HP204 will enter recording standby mode. If you decide not to record, press the [ ] button once again. The button of the track to be recorded will flash. 3. Press the button of each track you don't want to record, turning off its illumination. You can record to only one track button at a time. Recording 4. Press the [ ] button. ] button). In this After two measures of count sound, recording begins. Recording starts when you start playing the keyboard (without pressing the [ case, a count is not sounded. When recording begins, the [ ] button and [ ] button will light. During the count-in, the count measure is indicated in the display as "-2" then "-1. " 5. To stop recording, press the [ ] button. Recording an additional part 6. [. . . ] Edwin Moses Road, Mumbai-400011, INDIA TEL: (022) 2493 9051 GERMANY Roland Elektronische Musikinstrumente HmbH. Oststrasse 96, 22844 Norderstedt, GERMANY TEL: (040) 52 60090 BRAZIL Roland Brasil Ltda. Rua San Jose, 780 Sala B Parque Industrial San Jose Cotia - Sao Paulo - SP, BRAZIL TEL: (011) 4615 5666 UNITED KINGDOM Roland (U. K. ) Ltd. Atlantic Close, Swansea Enterprise Park, SWANSEA SA7 9FJ, UNITED KINGDOM TEL: (01792) 702701 PANAMA SUPRO MUNDIAL, S. A. [. . . ]