User manual ROLAND JET PHASER AP-7 SERVICE MANUAL

[. . . ] Français Italiano Español Place Vertically for a Speech When the unit is placed vertically it will enter mono mode, and the audio will be optimized for maximum projection distance. Place Horizontally for Music When the unit is placed horizontally it will enter stereo mode, and the audio will be optimized for music. português Anti-Feedback Function Reduces mic feedback (whine or howl). Mic Echo It's easy to apply an echo that's ideal for karaoke. [. . . ] Français Press the upper part of the [POWER] switch to turn on the JET PHASER AP-7's power . * This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally. * Before switching the power on/off, always be sure to turn the volume down. Even with the volume turned down, you might hear some sound when switching the power on/off. However, this is normal and does not indicate a malfunction. Insert the batteries, making sure that the polarity is correct . Switch on any equipment connected to the LINE OUT jack . Switching the Power Off Turn the power off by reversing the order in which you turned the power on. Português Turn the grip in the direction of the arrow to reattach it . Nederlands Grip 11 Using a Mic Using a Wireless Mic Here's how to produce sound using the DR-WM55 wireless mic. Turn on the power switch of the wireless mic while holding down the [ECHO ON] switch . * Pairing mode will be cancelled if pairing is not accomplished within 30 seconds from the time that the WIRELESS 2 indicator starts blinking. 12 Using a Mic Using the Mic Once pairing has been completed, you can start using the mic with the JET PHASER AP-7. Using a Wired Mic You can use a commercially available wired mic with the JET PHASER AP-7. Turn on the power switch of the DR-WM55 . Connect your microphone to the MIC input Jack . If the mic has a switch, turn the switch on. XLR type TRS type Phone type English 2. While speaking into the mic, use the MIC [VOLUME] knob to adjust the volume . To adjust the volume of the first wireless mic, use the WIRELESS 1 [VOLUME] knob. To adjust the volume of the second wireless mic, use the WIRELESS 2 [VOLUME] knob. [. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. ­ Increase the separation between the equipment and receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ­ Consult the dealer or an experienced radio/TV technician for help. [. . . ]