User manual ROLAND KR111-PE

[. . . ] Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner's Manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference 202 Copyright © 2005 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] When "All" is selected, all of the sets of User Programs on the external memory are copied to user memory. 6. Touch <Execute>. The selected User Programs are deleted. * Never turn off the power or eject the external memory from the external memory port while the operation is in progress. Doing so will damage the KR's internal memory, making it unusable. Specifying the Copy Destination 7. Touch <User> to select the copy destination for the set of User Programs. If a User Program name is displayed, already a User Program saved to that number is already. If you select a number with User Programs data, and then copy data to that number, the previously saved User Programs are deleted. If you do not want to delete the saved User Programs, select a number in the savedestination column for which no name is displayed. 111 Chapter 6 User Program Registration 8. Touch <Execute>. The set of User Programs on the external memory is saved to user memory. * Never turn off the power or eject the external memory from the external memory port while the operation is in progress. Doing so will damage the KR's internal memory, making it unusable. If you want to use the Load Next function to switch among User Programs saved to external memory, make sure to set Load Next in all of the User Program sets to "On. " Also, be sure to set the Pedal Shift value so it is for the same pedal. Coping Sets of User Programs Stored in the User Memory to External Memories You can take User Program sets saved in user memory and copy them to external memories. In this case, in the Copy User Programs screen in Step 4 above, touch the large arrow icon in the center to get the arrow to point up. This sets the KR to copy the User Program set in the user memory to the external memory. The KR is capable of multitrack recording of up to sixteen parts. Since each part's performance is recorded using one tone, you can layer performances, using up to sixteen tones for the data in one song. The function used to layer these sixteen parts, one at a time, is called the "16-Track Sequencer. " fig. 16track. e Commercially Available Music Files Commercially available song file recorded in Roland's SMF format is also composed of sixteen parts. By loading the song file from the external memory and using the 16-Track Sequencer, you can then also edit the song file. Although with commercially available Roland SMF music data, Part 11 is included in the [2/Bass Accomp] track button, other tracks match to the corresponding Track buttons. * With some commercially available music files, you cannot edit the data. The 16-Track Sequencer Screen When recording with 16-track Sequencer, display the 16track Sequencer screen. 16-Track Sequencer You can record performances for up to 16 parts, overlaying them part by part, to create a single song. Flute Part Bass Part Piano Part (left hand) Piano Part (right hand) · · · Part 1 Part 2 Part 3 Part 4 1. Press the [Menu] button. The Menu screen appears. 2. Touch <16trk Sequencer>. A "16-track Sequencer screen" like the one shown below appears. fig. d-16tr. eps_50 Part 16 16-Track Sequencer and Track Buttons In addition to the "16-Track Sequencer" function, the "Track Buttons" (p. 84) are another of the unit's playing/recording functions. These five "Track buttons" are used for organizing the 16Track Sequencer's sixteen parts. This allows you to use the 16-Track Sequencer to add more sounds to performances recorded with the Track buttons, and make even more detailed edits of the songs. Chapter 7 You can easily play back the original song data with the 16Track Sequencer, mute parts by pressing the Track buttons, and more. [. . . ] Calle 11, Apartado 10237, San Jose, COSTA RICA TEL: 258-0211 IRELAND Roland Ireland G2 Calmount Park, Calmount Avenue, Dublin 12 Republic of IRELAND TEL: (01) 4294444 IRAN MOCO INC. No. 41 Nike St. , Dr. Shariyati Ave. , Roberoye Cerahe Mirdamad Tehran, IRAN TEL: (021) 285-4169 U. Eastern Avenue Los Angeles, CA 90040-2938, U. TEL: (323) 890 3700 TRINIDAD AMR Ltd Ground Floor Maritime Plaza Barataria Trinidad W. I. [. . . ]