User manual ROLAND M-1000 MANUAL 2

[. . . ] Owner's Manual 201b Before using this unit, carefully read the sections entitled: "IMPORTANT SAFETY INSTRUCTIONS" (Owner's manual p. 2), "USING THE UNIT SAFELY" (Owner's manual p. 3), and "IMPORTANT NOTES" (Owner's manual p. These sections provide important information concerning the proper operation of the unit. [. . . ] Windows for standard driver: CD-ROM "WinGenericDriver_E. htm" for special driver: Macintosh for special driver: CD-ROM "Driver" folder "ReadMe" folder "English" folder "ReadMe_E. htm" for standard driver: CD-ROM "WinGenericDriver_E. htm" CD-ROM "Driver" folder operating system version you are using ("WDM"/"MME") "ReadMe_E. htm" "WDM Driver" (p. With the M-1000 disconnected, start up your computer. If the setting is not default factory setting 2. Initialize the M-1000. Connect the M-1000 and the computer with a USB cable. Follow the instructions displayed to install the standard drivers. The M1000's USB indicator lights. The instructions are not displayed if the drivers have already been installed; in this case, proceed to step 8. Initialize: Set the [SELECT] switch to the optical setting, then hold down the CLOCK SOURCE button while turning on the M-1000 (p. Press the CLOCK SOURCE button to switch the M-1000 to Advanced mode (the light flashes). Turn off the M-1000 (do not turn it on again just yet). During the re-boot procedure, USB indicator or internal indicator (INT) of M-1000 irregulary blinks. Open the folder on the included CD-ROM corresponding to the operating system version you are using, then run "Setupinf. exe" in the "Driver" folder. Follow the instructions displayed to install the special driver. The M-1000's USB and ADVANCED indicators light. Go to "Start" ("Settings" ) "Control Panels" "Sound and Audio Device" (, "Sound and Multimedia" or "Multimedia"); specify the M-1000 (or the USB audio device) as the priority device for audio. Please confirm USB indicator lits after re-booting. You can choose any sampling rate. 14 USB Audio With Macintosh 1. With the M-1000 disconnected, start up your computer. Run "M-1000 USB Installer J" on the included CD-ROM. Follow the instructions displayed to install the special driver. Connect the M-1000 and the computer with a USB cable. If in Advanced mode (ADVANCED indicator lit), press the CLOCK SOURCE button to switch to Standard Driver mode (ADVANCED indicator off), and turn the M-1000 off and then on again. Wait five seconds for the standard drivers to be recognized automatically, then go to Control Panels in the Apple menu and open the "Sound" control panel. For "Input, " specify "USB Audio" (required when using the standard driver). Uncheck the "Play sound through output device" option. Switch the M-1000 to Advanced mode (the ADVANCED indicator should flash; turn the M-1000 off and then on again). You can choose any sampling rate. During the re-boot procedure, USB indicator or internal indicator (INT) of M-1000 irregulary blinks. [. . . ] Ltd. 409, Nirman Kendra Mahalaxmi Flats Compound Off. Edwin Moses Road, Mumbai-400011, INDIA TEL: (022) 493 9051 BRAZIL Roland Brasil Ltda Rua San Jose, 780 Sala B Parque Industrial San Jose Cotia - Sao Paulo - SP, BRAZIL TEL: (011) 4615 5666 GERMANY Roland Elektronische Musikinstrumente HmbH. Oststrasse 96, 22844 Norderstedt, GERMANY TEL: (040) 52 60090 UNITED KINGDOM Roland (U. K. ) Ltd. Atlantic Close, Swansea Enterprise Park, SWANSEA SA7 9FJ, UNITED KINGDOM TEL: (01792) 700139 NORTH AMERICA CANADA Roland Canada Music Ltd. (Head Office) 5480 Parkwood Way Richmond B. C. , V6V 2M4 CANADA TEL: (604) 270 6626 INDONESIA PT Citra IntiRama J1. [. . . ]