User manual ROLAND M-100FX QUICK START GUIDE

[. . . ] Thank you, and congratulations on your choice of the Edirol M-100FX. Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner's manual should be read in its entirety. [. . . ] The effect will not be satisfactory if the voice being input is too soft, or if more than one person is speaking, or if there is excessive background noise. By modifying the pitch and formants of the voice, this effect transforms a male voice into a female voice. This is convenient when you are recording a dialog or dramatic presentation by yourself. By setting the effect balance knob near the center, you can mix the modified sound with the original sound, producing the impression of a duet. By applying this effect to an actual female voice, you can produce a thinner and more delicate voice. If you apply this effect excessively, the sound may crack or distort. As you turn effect knob A toward the right, the pitch of the voice will be raised. If the knob is turned all the way toward the left, the voice will be at the original pitch. "Formants" are features of a voice that determine its character. Turning the knob toward the right will produce a more shrill voice (as if the vocal cords were smaller). If the knob is turned all the way toward the left, the formants will be as in the original voice. You should input the voice of only one person. The clearer the original voice, the better the effect will be. The effect will not be satisfactory if the voice being input is too soft, or if more than one person is speaking, or if there is excessive background noise. * Il tasto phantom power deve rimanere in posizione off a meno di non utilizzare un microfono condenser che richiede questo tipo di alimentazione. When sound is produced in a building such as a concert hall or auditorium, the sound reflects from the walls and ceiling of the room and reaches the listener at a later time. This is called reverberation, usually abbreviated as "reverb". The character of reverb depends on the size of the space (hall, room, etc. The M-100FX can digitally simulate these aspects of reverb, and add the reverb to the original sound. Direct sound: Sound that reaches the listener directly from the sound source. Early reflections: Sound that reaches the listener after being reflected once. Reverb is not applied to sound that is input from the computer via USB, nor to the sound that is input from the external input jacks (AUX RETURN). [. . . ] In order to install/delete/re-install the driver in Windows XP/2000, you must be logged into Windows as a user with administrative privileges, such as Administrator. In order to install/re-install the driver, you must make "Driver Signing Options". * If you are using Windows XP Professional/2000, log on as a user that has administrative privileges (e. Insert the CD-ROM into the CD-ROM drive of your computer. [. . . ]