User manual ROLAND M-10DX

[. . . ] Owner's Manual Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner's manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Copyright © 2007 ROLAND CORPORATION All rights reserved. [. . . ] Raising this setting will produce a stronger sense of attack. Specifies the strength of the effect that clarifies the voice. Raising this setting will apply the effect more strongly. * If this effect is applied excessively to a voice that is already clear, the sound may become unpleasant or distorted. Raising this setting will apply the effect more strongly. NS -90. 0­ -40 dB ATTACK 0­100 CLARITY 0­100 DEESSER 0­100 26 Advanced use Applying echo/reverb (FX) As effects that process the output signal, the M-10DX provides two types of echo and five types of reverb. You can edit the parameters of the echo/reverb effect to your needs and taste. Use the AUX/FX knobs to adjust the depth of echo/reverb for each input (p. 12). The edited settings are remembered even when the power is off. Editing the effect settings fig. FX-01 1. Press the [FX] button so it's lit, turning the effect on. The FX screen will appear. * If a different screen is displayed even though the [FX] button is lit, you can press the [FX] button to access the echo/reverb screen. fig. FX-02 If you press the [FX] button when the FX screen is already displayed, the effect will be turned off and the button's light will go out. Selecting the effect type fig. FX-01 2. 3. Use the CURSOR [BWD] [FWD] buttons to move the cursor to the effect type. Use the VALUE [-] [+] buttons to select the effect type. Editing the parameters fig. FX-03 4. 5. Use the CURSOR [BWD] [FWD] buttons to move the cursor to the parameter you want to edit. Use the VALUE [-] [+] buttons to edit the value. If you press the [+] button while holding down the [-] button, or press the [-] button while holding down the [+] button, the value will change more rapidly, allowing you to edit the value more efficiently. If the [FX] button is lit, you can hold down the [DISPLAY] button and press the [FX] button to turn the effect off at any time. 27 Advanced use List of effects SHORT ECHO This is an echo effect that repeats the sound at short intervals. Parameter DELY REPT Range 10­200 (ms) 0. 0­6. 0 (s) Explanation Adjusts the spacing of the repetitions. Adjusts the length (time) of the repetitions. ECHO This is an echo effect that repeats the sound at longer intervals. Parameter TIME DAMP Range 0. 0­6. 0 (s) 315­8k (Hz), BYP Explanation Adjusts the length (time) of the repetitions. Specifies the frequency at which the repeated sound will begin to be attenuated. With the "BYP" setting, the repeated sound will not be attenuated. ROOM This simulates the reverberation of a room such as a live house or club. SMALL HALL This simulates the reverberation of a small concert hall. Parameter P. DLY TIME DAMP Range 0. 0­160 (ms) 0. 0­6. 0 (s) 315­8k (Hz), BYP Explanation Adjusts the time at which the reverberation starts being heard. Adjusts the length (time) of reverberation. Specifies the frequency at which the reverberation will begin to be attenuated. With the "BYP" setting, the reverberation will not be attenuated. LARGE HALL This simulates the reverberation of a large space such as a concert hall or gymnasium. [. . . ] BO. Paz Barahona 3 Ave. 11 Calle S. O San Pedro Sula, Honduras TEL: (504) 553-2029 SLOVAKIA DAN Acoustic s. r. o. SK - 940 01 Nové Zámky TEL: (035) 6424 330 OMAN TALENTZ CENTRE L. L. C. Malatan House No. 1 Al Noor Street, Ruwi SULTANATE OF OMAN TEL: 2478 3443 THAILAND Theera Music Co. 330 Soi Verng NakornKasem, New Road, Sumpantawongse, Bangkok 10100, THAILAND TEL: (02) 224-8821 CZECH REP. CZECH REPUBLIC DISTRIBUTOR s. r. o Voctárova 247/16 CZ - 180 00 PRAHA 8, CZECH REP. [. . . ]