User manual ROLAND M-480

[. . . ] Owner's Manual Before using this unit, carefully read the sections entitled: "IMPORTANT SAFETY INSTRUCTIONS" (p. 2), "USING THE UNIT SAFELY" (p. 3­5), and "IMPORTANT NOTES" (p. These sections provide important information concerning the proper operation of the unit. [. . . ] The scene you selected in step 3 and all subsequent scene will be renumbered upward by one, and the scene you copied in step 2 will be copied to the number you selected in step 3. Following step 2, you can use [F4 (PASTE)] or [F5 (INSERT)] to paste or insert the cut scene to any desired scene number. Erasing the contents of a scene 1. From the scene list, select the scene whose contents you want to erase. Pressing [F7 (CANCEL)] will cancel the operation. If a scene exists at scene number 299, you won't be able to use [F5 (INSERT)] to insert a scene. 3. Press [F6 (CLEAR)]. You can't paste to a scene that's locked. Cutting a scene 1. From the scene list, select the scene that you want to cut, and press [F3 (CUT)]. Pressing [F7 (CANCEL)] will cancel the operation. A message will ask you to confirm the Clear operation. Press [F8 (CLEAR)] to carry out the Clear operation. The contents of the scene you selected in step 2 will be erased. You can't erase a scene that is locked. A message will ask you to confirm Cut operation. Scene memory The Global Scope function Global Scope is a function that lets you limit the channels and parameters that will be recalled; its settings apply to all scenes. The GLOBAL SCOPE popup is used to make settings for the Global Scope function. fig. ScrRecallSafeGuide2. eps 3 GLOBAL SCOPE popup fig. ScrRecallSafeGuide. eps 1 2 1 Parameter recall scope buttons (CH1­48, RTN 1­6, AUX/MTX/MAIN tab) These buttons specify the scope of the parameters that will be recalled for the channels selected by the channel recall scope buttons. De-select the parameters that you don't want to be recalled. 125 Scene memory The parameter recall scope buttons correspond to the following parameters: · For CH1­48 and RTN 1­6 Item Preamp Phase ATT HPF* Gate* Comp* Delay EQ* Fader Pan LCR Send Direct Mute To MAIN Explanation Preamp gain, pad, and +48V phantom power Phase Attenuator High-pass filter Gate/Expander Compressor Delay 4-band EQ Faders Pan LCR button, CENTER AUX/MTX sends Direct out point Mute MAIN send De-select the channels that you don't want to be recalled. 3 OTHER parameter recall scope buttons Use these to specify other parameters that will be included in the scope of recall. De-select the parameters that you don't want to be recalled. The function buttons have the following operations: [F1 (CH 1­48)] [F2 (RTN 1­6)] [F3 (AUX/MTX/MAIN)] [F4 (OTHER)] [F8 (CLOSE)] Displays CH1­48 as the channel recall scope buttons. Displays RTN 1­6 as the channel recall scope buttons. Displays AUX1­16, MTX1­8, and MAIN L/R/C as the channel recall scope buttons. Displays the OTHER parameter recall scope buttons. Closes the popup. *: CH 1­48 only. · For AUX/MTX/MAIN Item ATT EQ Fader Balance LCR Phase Limiter Delay MTX Send Mute To MAIN Setting Attenuator 4-band EQ Faders Balance LCR button, CENTER Phase Limiter Delay MTX sends Mute MAIN send Using the Global Scope function 1. Press [F6 (GLOBAL SCOPE)] to access the GLOBAL SCOPE popup. 3. Use the channel recall scope buttons of [F1 (CH 1­48)] and [F2 (RTN 1­6)] to specify the channel recall scope. 4. Specify the scope of parameters that will be recalled for CH 1­48 and RTN 1­6. 5. Use the channel recall scope buttons of [F3 (AUX/MTX/ MAIN)] to specify the channel recall scope. 6. Specify the scope of parameters that will be recalled for AUX, MTX and MAIN. Scene memory 7. Use the OTHER parameter recall scope buttons of [F4 (OTHER)] to specify the other parameters that will be recalled. 2 Channel recall scope buttons These buttons specify the channels that will be included in the recall scope. 8. Press [F8 (CLOSE)] to close the popup. Linking scene memories to M-48 memories Linking M-48 store operations If desired, M-48 memories can be stored simultaneously when a scene memory is stored on the M-480. [. . . ] 140 OTHER tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 USER FADER tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 USER screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 V V-LINK SOURCE CHANNEL SELECT popup . . . . . . . . . . . . . . . . . . . . [. . . ]