User manual ROLAND MD-P1

[. . . ] Read me first motion dive . tokyo console Owner's Manual 04121223 '05-10-1N Basic Operation For details on using the software "motion dive . tokyo" refer to the separate "motion dive . tokyo" manual. The most important thing about this hardware console is that it's "easy to understand. " The "motion dive . tokyo console" is designed with the same form of interface as motion dive. Operating the "motion dive . tokyo console" is extremely simple; this page contains everything there is to know about it. The "motion dive . tokyo console MD-P1" is a dedicated controller for the "motion dive . tokyo" software. Roland provides no guarantee or support regarding its use with any software other than "motion dive . tokyo". Assignable controls You can assign various operations to the two knobs A (left side) and B (right side). [. . . ] If you are using a computer that does not fulfill the electrical requirements of the USB specifications, operation may be unstable. In this case, you may be able to solve the problem by connecting a USB hub. In the Device Manager, do you see "Other device, " "Unknown device, " or a device for which "?", "!" or "x" is displayed?(Windows) If the driver installation could not be successfully completed, the installed driver may remain in an incomplete state. ("Installing the USB Driver") Windows XP/2000 displays a "Hardware Installation" or "Digital Signature Not Found" dialog box Did you make "Driver Signing Options"?In order to install/re-install the driver, you must make the settings described in "Installing the USB Driver. " You are asked to install the driver file even though you installed the driver (Windows) Did you connect the MD-P1 to a different USB connector than the one you used when installing the driver?If your computer or USB hub has two or more USB connectors, and you connect the MD-P1 to a different USB connector, you may be asked for the driver file even though the driver has already been installed in your computer. (Such a response does not indicate a malfunction. ) Proceed as follows to install the driver. With the MD-P1 left unconnected, start up your computer. The Found New Hardware Wizard dialog box will appear. If the message "Connect to Windows Update to search for software?" appears, choose "No" and then click [Next]. Choose "Search for the best driver in these locations" and click [Next]. If a dialog box with an "!" or "x" symbol will appear, click [Continue Anyway] to proceed with the installation. If you are unable to continue, click [OK] and repeat the driver installation. ("Installing the USB Driver") Windows 2000: If a dialog box indicating "Digital Signature Not Found" will appear, click [Yes] to proceed with the installation. If you are unable to continue, click [OK] and repeat the driver installation. ("Installing the USB Driver") 3. The Completing the Found New Hardware Wizard dialog box will appear. In the Driver Setup dialog box, click [Close]. If the Change System Settings dialog box appears, click [Yes]. "Find new hardware wizard" does not execute automatically "Find new hardware wizard" ends before the process is completed "Found unknown device" appears even though you installed the driver (Windows) Is the USB cable connected correctly?Make sure that the MD-P1's USB cable and your computer are correctly connected. [. . . ] Paseo García Faria, 33-35 08005 Barcelona SPAIN TEL: 93 493 91 00 QATAR Badie Studio & Stores P. O. Box 62, Doha, QATAR TEL: 423554 THAILAND Theera Music Co. 330 Verng NakornKasem, Soi 2, Bangkok 10100, THAILAND TEL: (02) 2248821 HONDURAS Almacen Pajaro Azul S. A. BO. Paz Barahona 3 Ave. 11 Calle S. O San Pedro Sula, Honduras TEL: (504) 553-2029 CZECH REP. K-AUDIO Kardasovska 626. [. . . ]