User manual ROLAND MDS-10PL

[. . . ] Thank you and congratulations on your choice of the Roland Drum Stand MDS-10RD/MDS-10PL. Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" (p. [. . . ] The q symbol alerts the user to things that must be carried out. The specific thing that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the powercord plug must be unplugged from the outlet. Before using this unit, make sure to read the instructions below, and the Owner's Manual. Never climb on top of, nor place heavy objects on the unit. Do not attempt to repair the unit, or replace parts within it (except when this manual provides specific instructions directing you to do so). Should you remove the bolts and washers, make sure to put them in a safe place out of children's reach, so there is no chance of them being swallowed accidentally. Never use or store the unit in places that are: · , direct sunlight in an enclosed vehicle, near a heating duct, on top of heat-generating equipment); or are · Make sure to firmly tighten all clamps and bolts after you have assembled the stand and attached a pad or unit to it. You should probably also try to make a habit of checking and retightening them if necessary before every performance. You risk injury if you have loose screws or clamps, since a pad or unit can fall unexpectedly. When setting up or storing the stand, be careful not to pinch the fingers you use to handle the stand. In addition to the items listed under "USING THE UNIT SAFELY" on this page, please read and observe the following: Make sure you always have the unit placed so it is level and sure to remain stable. [. . . ] * Slight modifications may have been made in the parts making up the Drum Stand, so the illustration may not provide an exact depiction. When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. [. . . ]