User manual ROLAND MICRO CUBE BASS RX

[. . . ] Equipped with four newly developed 10-cm (4-inch) speakers, this compact but powerful 5-watt stereo power amp (2. Dual power operation allows the amplifier to be used anywhere. Combined with the three-band equalizer, enables finely textured sound creation. Can also be used as a simple PA system using the MIC. [. . . ] â· To avoid disturbing your neighbors, try to keep the unit's volume at reasonable levels. You may prefer to use headphones, so you do ot need to be concerned about those around you (especially when it is late at night). â· When you need to transport the unit, package it in the box (including padding) that it came in, if possible. To avoid sudden, high-volume sound, always make sure to have the volume Even with the volume all the way down, you may still hear some sound when the power is switched on and off, but this is normal, and does not indicate a malfunction. By anchoring the AC adaptor cord using the cord hook, as shown in the illustration, you can prevent situations such as the adaptor becoming unplugged or unreasonable pressure being exerted on the AC adaptor jack. * To avoid faulty operation or damage to the speakers, you should disconnect the unit from other devices and switch off its power when connecting the AC adaptor. Connect the supplied power cord to the AC adaptor, and plug it into an AC outlet. If the strap is loose, and you use it that way when carrying the MICRO CUBE BASS RX, the amp could be dropped, possibly resulting in damage or injury. The included strap is meant for exclusive use with the MICRO CUBE BASS RX. Do not use this strap Place the AC adaptor so the side with the indicator (see illustration) faces upwards. * The indicator will light when you plug the AC adaptor into an AC outlet. Do not spin or swing the MICRO CUBE BASS RX while holding it by the strap. This is extremely dangerous, as it may cause the strap to become detached; or, if the motion is repeated enough, may even break the strap. Attach the strap securely so that it does not easily become Level turned down before switching on power. Once the connections have been completed, turn on power to your various It features a fat sound, while the amp's compact cabinet produces a distinct contour. b MAN Models the Fender Bassman 100 (4 x 12"). This amp has been a favorite since the inception of electric basses. This amp was used in the '70s not only by famous jazz bassists, but by funk and hard rock players as well. It features a wide-range tone that balances presence in the low end with a clear, open sound. cONCERT 810 Models the Ampeg SVT + 810E (8 x 10"). This amp typifies the rock sound that relied heavily on combinations of high-output, tube amp sections and large-sized cabinets. The characteristic sound is one of overwhelming low-frequency sound pressure. [. . . ] You can create some impressive sounds by applying effects like T-WAH or combining them with DELAY. This setting is suitable for a great slap bass sound. You can get a sticky sound by switching on the COMPRESSOR (COMP). If you apply some reverb, you can create a more sumptuous sound. [. . . ]