Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ROLAND MX-200. We hope that this ROLAND MX-200 user guide will be useful to you.
Lastmanuals help download the user guide ROLAND MX-200.
You may also download the following manuals related to this product:
ROLAND MX-200 V1.00 MIDI IMPLEMENTATION (42 ko)
Manual abstract: user guide ROLAND MX-200
Detailed instructions for use are in the User's Guide.
[. . . ] Owner's Manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. * As shown in the illustration below, insert the bolts in alternate directions, with the small knob below. [. . . ] * As shown in the illustration below, insert the bolts in alternate directions, with the small knob below. 1) Remove the round nut attached to each stopper, and insert the stoppers into the oblong holes in the board. Small knob Bolt Angle adjustment knob 2) Temporarily fasten to the board by lightly tightening the lower round nut that you removed. * Make sure that there are no gaps at the locations shown in the illustration below. 1) Place the tripod legs so that they will not be in your way. How it should look when assembled 1) Remove the angle adjustment knob, the small knob, and the washers and bolts from the upper portion of the tripod. * Be careful not to pinch your fingers when extending the tripod. * If you'll be using a mouse, place the computer as close to the center as possible while still allowing space for yourself to operate the mouse. 962a * In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice. Use cable ties to bundle any connected cables and fasten them to the stand. 2) Open the screen of your notebook computer, adjust the height of each stopper by loosening the round nut appropriately for the thickness of your computer, and then fasten it in place. * If the height is inappropriate, your notebook computer may slide out from the stoppers, or the portion held by the stoppers may break. * Depending on the design of your notebook computer, the stoppers may prevent you from inserting the power plug, connectors, or CD-ROM discs. if so , adjust the location at which your computer is fastened. [. . . ] * If the height is inappropriate, your notebook computer may slide out from the stoppers, or the portion held by the stoppers may break. * Depending on the design of your notebook computer, the stoppers may prevent you from inserting the power plug, connectors, or CD-ROM discs. if so , adjust the location at which your computer is fastened. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ROLAND MX-200
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ROLAND MX-200 will begin.
ROLAND MX-200 V1.00 MIDI IMPLEMENTATION (42 ko)
