User manual ROLAND OCTA-CAPTURE

[. . . ] 201a Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner's Manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. About WARNING and CAUTION Notices About the Symbols The symbol alerts the user to important instructions or warnings. The specific meaning of the symbol is determined by the design contained within the triangle. [. . . ] To clear the settings, choose "Yes, " and then press the [CURSOR/VALUE] knob. If you decide not to clear the settings, choose "No, " and then press the [CURSOR/VALUE] knob. Specifies the time after which power to the OCTA-CAPTURE will automatically be turned off, following the last time it was operated. Range: OFF, 4HOURS Initializes the system settings. INITIALIZE For details on the values, refer to "Initializing the Settings" (p. When you select the item to be initialized, a confirmation message will appear. To execute initialization, press the [CURSOR/VALUE] knob. If you decide not to initialize, press the [DISPLAY] button. POWER OFF 3. Press the [CURSOR/VALUE] knob . The parameter value will be highlighted. 60 4. Turn the [CURSOR/VALUE] knob to edit the value . Press the [CURSOR/VALUE] knob to finalize the setting . Press the [DISPLAY] button . You will return to the previous screen. 61 Live Set-up with Four Stage Monitors The sounds being input to INPUT 1­8 can be mixed independently by the four direct mixers, and sent from each mixer to a different output destination. For example, this is convenient when you want to provide each member of a band with their own monitor mix. Monitor speakers Guitar ×2 Monitor speakers ×2 Microphone Power amp Power amp OUTPUT 3-4 OUTPUT 1-2 OUTPUT 7-8 OUTPUT 5-6 Drum Set ×2 Power amp Bass ×2 Drum Monitor Monitor speakers Connect your monitor speakers as shown in the illustration, and make patch bay settings as follows (p. As the source for OUTPUT 1-2, choose "DIRECT MIX A" and use it as the monitor mix for the vocalist . As the source for OUTPUT 3-4, choose "DIRECT MIX B" and use it as the monitor mix for the guitarist . As the source for OUTPUT 5-6, choose "DIRECT MIX C" and use it as the monitor mix for the bassist . As the source for OUTPUT 7-8, choose "DIRECT MIX D" and use it as the monitor mix for the drummer . If desired, you can choose the same source for all OUTPUT jacks. 62 Connecting Two OCTA-CAPTURE Units If you connect two OCTA-CAPTURE units, you'll be able to use them as a 24-in/20-out audio interface with ASIO on Windows or with Core Audio on Mac OS X. In order to connect two OCTA-CAPTURE units and use them, you must turn on the VS EXPAND setting of the second unit, and set both units to digitally synchronize at the same sampling frequency. * A maximum of two OCTA-CAPTURE units can be connected simultaneously . Before you start making settings, disconnect both OCTA-CAPTURE units from the computer and turn off their power. 78 7 First unit (OCTA-CAPTURE) 6 Second unit (OCTA-CAPTURE EXP) 6 COAXIAL IN (9/10) Coaxial Cable 5 4 9 COAXIAL OUT (9/10) 23 1 VS EXPAND: OFF DIGITAL: AUTO SAMPLE FREQ: Same settings as second unit VS EXPAND: ON DIGITAL: AUTO 1. Switch on the power to the second OCTA-CAPTURE unit . The second OCTA-CAPTURE unit will be the timing master. 2. [. . . ] Calle 11, Apartado 10237, San Jose, COSTA RICA TEL: 258-0211 U. Eastern Avenue Los Angeles, CA 90040-2938, U. TEL: (323) 890 3700 NORWAY Roland Scandinavia Avd. Kontor Norge Lilleakerveien 2 Postboks 95 Lilleaker N-0216 Oslo, NORWAY TEL: 2273 0074 TRINIDAD AMR Ltd Ground Floor Maritime Plaza Barataria TRINIDAD W. I. [. . . ]