User manual ROLAND OP-R09HR-W

[. . . ] The manual should be saved and kept on hand as a convenient reference. Conventions Used in This Manual Operating buttons are enclosed by square brackets [ ]; e. g. , [ENTER]. This indicates an important note; be sure to read it. This indicates a memo regarding the setting or function; read it as desired. This indicates a useful hint for operation; read it as necessary. [. . . ] This is an on/off switch for Program Change message transmission. These messages are used to select Tones. This specifies whether MIDI Clock messages will be transmitted. Use this when you want a connected external MIDI device to synchronize to the OP-R09HR-W. This specifies whether Start/ Stop/Continue messages will be transmitted. Song mode: Start/Stop/Continue Style mode: Start/Stop This specifies whether Song Position Pointer messages will be transmitted to indicate the currently playing position in Song mode. If you don't want this message to be transmitted, choose the Off setting. This is valid only if [SONG] is lit. Value OFF, ON Parameter Explanation This specifies how the OP-R09HR-W will synchronize to an external MIDI device. Synchronization is available if the MIDI OUT connector of your external MIDI device is connected to the GW8's MIDI IN connector. (If you've made the opposite connection, refer to the owner's manual for your external device. ) This is an on/off switch for Pitch Bend message reception. These messages temporarily raise or lower the pitch of the keyboard mode Tone. Turn the VALUE dial to select the driver. Value VENDER GENERIC Explanation Select this if you use the supplied driver. Select this if you use a generic USB driver included with the OS. The file name for a Style or Song that can be used by the GW8 must be no longer than sixteen characters (not including the filename extension). # $ % & ` ( ) - @ ^ _ ` { } You must assign a filename extension of ". stl" to Style files, and a filename extension of ". mid" to Song files. Depending on the type of characters you use, it may not be possible to display the file name in some cases. 6. Turn the power off and then on again. 45 System Settings Settings that affect the entire operating environment of the OP-R09HR-W, such as tuning and MIDI message reception, are referred to as "system settings. " USB Driver VENDER, GENERIC Refer to "Making the Settings for the USB Driver" (p. SYSTEM PEDAL How to Make System Settings ([MENU]) 1. Use [ ][ ][ ] to select "System" then press [ENTER]. ] to select a page, and use [ ][ ] to Parameter Value Explanation Selects the function that will be controlled when you press a separately available pedal connected to the CONTROL PEDAL jack. EXPRESSION The pedal will function as an Expression pedal. Chord detection in the Lower Part area of the keyboard will be off while you hold down the pedal, allowing you to perform using the entire keyboard. The setting will return to its previous state when you release the pedal. [. . . ] Music Sound Light 155, New National Road Patras 26442, GREECE TEL: 2610 435400 INDONESIA PT Citra IntiRama Jl. 15J-15O Jakarta Pusat INDONESIA TEL: (021) 6324170 CHILE Comercial Fancy II S. A. Rut. : 96. 919. 420-1 Nataniel Cox #739, 4th Floor Santiago - Centro, CHILE TEL: (02) 688-9540 PARAGUAY Distribuidora De Instrumentos Musicales J. E. Manduvira Asuncion PARAGUAY TEL: (595) 21 492147 KOREA Cosmos Corporation 1461-9, Seocho-Dong, Seocho Ku, Seoul, KOREA TEL: (02) 3486-8855 HUNGARY Roland East Europe Ltd. [. . . ]