User manual ROLAND PCR-300

[. . . ] Owner's Manual Contents Names of things and what they do . . . . . . . . . . . . . . . . 4 Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Side panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Saving a control map on your computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Loading a control map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 14 As appropriate for the type of controller, set the button mode (p. 64) or make virtual center click settings (p. 65). 53 Settings (Edit mode) Advanced editing 1 RPN/NRPN advanced editing 1 lets you specify the upper limit and lower limit for the data entry MSB (CC#6) of the transmitted RPN/NRPN message, in addition to allowing you to make the settings described in basic editing. 1. 2. Press the [EDIT] button so it's lit. Slightly move the controller to which you want to assign an RPN or NRPN message. If the controller is a button, press it. The display will indicate the number of the controller you selected. Check the indication in the display, then press the [ENTER] button. Turn the VALUE knob to make "RP" appear. * If you want to assign an NRPN, make "NP" appear. The rest of the procedure is the same as for RPN. 3. Turn the VALUE knob or press controller [A2 (1)] to select the "RP1" indication. RPN MSB (CC#101) (or the NRPN MSB (CC#99)). 10. Use the VALUE knob or controllers [A1]­[A8] and [B1]­[B8] to specify the 11. Use the VALUE knob or controllers [A1]­[A8] and [B1]­[B8] to specify the RPN LSB (CC#100) (or the NRPN LSB (CC#98)). 13. Specify the range of the data entry MSB (CC#6). (-> Specifying the value range (upper/lower limits) (p. Specify the output port. (-> Port setting (p. As appropriate for the type of controller, set the button mode (p. 64) or make virtual center click settings (p. 65). 54 Settings (Edit mode) System exclusive assign You can assign a system exclusive message to a controller. Advanced editing 2 lets you assign a single-byte system message (system realtime message, tune request). Advanced editing 3 and 4 let you freely assign a message of up to twenty-four bytes. Edit Basic editing Controller [A1 (0)] Display Content Sys Ex. message Value range Range of initial settings Ending condition Enter F7 Remarks/Limitations First byte fixed at F0 Advanced editing 1 [A2 (1)] Sys Ex. [. . . ] TEL: (323) 890 3700 KOREA Cosmos Corporation 1461-9, Seocho-Dong, Seocho Ku, Seoul, KOREA TEL: (02) 3486-8855 BARBADOS A&B Music Supplies LTD 12 Webster Industrial Park Wildey, St. Michael, Barbados TEL: (246)430-1100 BELGIUM/FRANCE/ HOLLAND/ LUXEMBOURG Roland Central Europe N. V. Houtstraat 3, B-2260, Oevel (Westerlo) BELGIUM TEL: (014) 575811 ITALY Roland Italy S. Viale delle Industrie 8, 20020 Arese, Milano, ITALY TEL: (02) 937-78300 SAUDI ARABIA aDawliah Universal Electronics APL Corniche Road, Aldossary Bldg. , 1st Floor, Alkhobar, SAUDI ARABIA P. O. Box 2154, Alkhobar 31952 SAUDI ARABIA TEL: (03) 898 2081 UNITED KINGDOM Roland (U. K. ) Ltd. Atlantic Close, Swansea Enterprise Park, SWANSEA SA7 9FJ, UNITED KINGDOM TEL: (01792) 702701 MEXICO Casa Veerkamp, s. a. [. . . ]