User manual ROLAND PK-7 MANUAL 2

[. . . ] Owner's Manual Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" (p. 2, 3) and "IMPORTANT NOTES" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, this Owner's Manual should be read in its entirety. [. . . ] Make sure that the indicator on the rear panel of the PK-7 is lit. If you hear the pedal part of the VK-88, connections are complete. You can select the part that will be sustained when you press the Hold pedal. HOLD PEDAL ASSIGN (VK-88 Owner's Manual, p. 80) MEMO A variety of functions can be assigned to each foot switch (L/R). PK FOOT L ASSIGN (VK-88 Owner's Manual, p. 68) PK FOOT R ASSIGN (VK-88 Owner's Manual, p. 68) 7 Connecting to the VK-8 (Turning the Power On) Use a MIDI cable to connect the VK-8 and PK-7. MEMO The PK-7 provides a "MIDI Merge" feature, which allows you to have the MIDI messages received at MIDI IN be combined with the MIDI messages produced by playing the PK-7 itself. The resulting merged data stream is then transmitted from the MIDI OUT connector. 1. 3. NOTE Make sure that the power of the VK-8 and PK-7 is turned off. Use a MIDI cable to connect the VK-8's MIDI PEDAL IN connector to the PK-7's MIDI OUT connector. Connect the appropriate end of the AC adaptor to the DC IN jack. Then connect the other end to a standard AC outlet. Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices. 4. 7. Turn on the power of the PK-7, and make sure that the indicator on the PK-7's rear panel is lit. As described in the VK-8 Owner's Manual, turn on the power of the VK-8. Make sure that the Sub-Keyboard Function is on (VK-8 Owner's Manual p. If the pedal part is heard from the VK-8, connections are complete. Once you have made connections as described above, you can use the switches and pedals to control the following functions. · Expression pedal: Control the volume of all parts of the Organ, and the Other Tones. · Foot switch L: Switch the rotary effect between slow/fast. · Foot switch R: Turn the rotary effect brake on/off. · Hold pedal: Hold (sustain) the sound of the Organ voice and Other Tones. MEMO When the PK-7's FOOT SW-L OUT/FOOT SW-R OUT/HOLD jack is connected to the VK-8's CONTROL PEDAL jack, you can assign a variety of functions to the foot switch. Use a mono cable (phone-phone) to make connections. [. . . ] Rut. : 96. 919. 420-1 Nataniel Cox #739, 4th Floor Santiago - Centro, CHILE TEL: (02) 688-9540 PARAGUAY Distribuidora De Instrumentos Musicales J. E. Manduvira Asuncion PARAGUAY TEL: (595) 21 492147 IRELAND Roland Ireland G2 Calmount Park, Calmount Avenue, Dublin 12 Republic of IRELAND TEL: (01) 4294444 IRAN MOCO INC. No. 41 Nike St. , Dr. Shariyati Ave. , Roberoye Cerahe Mirdamad Tehran, IRAN TEL: (021) 285-4169 KOREA Cosmos Corporation 1461-9, Seocho-Dong, Seocho Ku, Seoul, KOREA TEL: (02) 3486-8855 U. Eastern Avenue Los Angeles, CA 90040-2938, U. [. . . ]