User manual ROLAND PR-1000HD

[. . . ] Owner's Manual PR-1 000 HD 201a 201b Before using this unit, carefully read the sections entitled: "IMPORTANT SAFETY INSTRUCTIONS" (p. 2), "USING THE UNIT SAFELY" (p. 4­6), and "IMPORTANT NOTES" (p. These sections provide important information concerning the proper operation of the unit. [. . . ] Select the type of transition effect to be used. Selects the transition effect type you prefer. · · · : : : The current clip fades to black, then the next clip fades in from black. The current clip fades to white, then the next clip fades in from white. The current clip fades to black, then the next clip starts playing back immediately. The current clip fades to white, then the next clip starts playing back immediately. You can also increase or decrease the transition effect time with the keyboard's [Page Up] and [Page Down] keys. · : 3. Click one clip in the palette area to start playback. When you click the clip again, the transition effect begins. 56 Introduction to Use of the PR-1000HD -- Playing Back Clips Color correction Here you can adjust the hue (H), color (S), and brightness (V) of the image. Color Correction button Introduction 1. Click the color correction button to access the color correction palette. Click the color palette to adjust the hue (H) and color (S). Audio Level button [INIT] button Color Palette Brightness slider 3. Move the brightness slider to adjust the brightness (V). By clicking the [INIT] button you can return the color settings to the default state. 57 Introduction to Use of the PR-1000HD -- Playing Back Clips Turning Loop Playback On and Off You can turn the Loop Mode settings on and off to have the same clip play repeatedly, play clips in sequence, or play back another specified clip. Click the [Loop] button to switch the setting. fig. playmode09. eps [Loop] button When the [Loop] button is lit, the clip plays according to its loop mode setting and the automatic playback settings. When setting the loop mode, you can either assign the same setting to clips of the entire palette, or to each video clip individually. To assign the same setting to clips of an entire palette, refer to "" (p. To set each clip, refer to "Setting Loop Mode for Each Clip" (p. To set the automatic playback, refer to "Setting Automatic Playback" (p. When the [Loop] button is not lit, playback will stop at the last frame or the out point of the clip (automatic playback will not be available). 58 Introduction to Use of the PR-1000HD -- Assigning Materials to Palettes Assigning Materials to Palettes Clips in the palette can be arranged in any order you like. Select materials from the Materials list. This procedure is carried out in the Edit Mode screen (p. 41). fig. editmode03. eps Palettes list Materials list inside project Introduction Clips list 1. Switch to Edit mode. The Edit Mode screen is displayed when you click the [Edit Mode] button in the upper right of the Play Mode screen. 2. Click one palette from the "Palettes" list to select the palette. The "Clips" list for the selected palette appears. 3. Assign materials to the palettes as clips. Select and drag one material from the "Materials" list and drop it in the position in the "Clips" list to which you want the material assigned. [. . . ] 104 Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Setting the Playback Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 126 MEMO 127 MEMO 128 MEMO 129 MEMO For EU Countries For China 130 MEMO 131 When you need repair service, call your nearest EDIROL/Roland Service Center or authorized EDIROL/Roland distributor in your country as shown below. Information ASIA INDONESIA PT. 15J-15O Jakarta Pusat INDONESIA TEL: (021) 632-4170 CENTRAL/LATIN AMERICA BRAZIL Roland Brasil Ltda. [. . . ]