User manual ROLAND R-09 HR SET

[. . . ] Position the microphone so it’s pointed at the sound source you want to record, then press the [REC Button]. This process analyzes the audio that’s being input, and determines the optimum recording level and microphone input sensitivity (Mic Gain). Sets the input level Once the detection process is complete, the unit will be set to the optimum input level, then you will be returned to the <Main Screen>. If you decide to cancel the operation, press the [MENU Button]. [. . . ] WAV, the Trim operation will create a new song named R09_0001-1. Search for the starting point of the portion you want to keep. Using the [PLAY Button ], [STOP Button ], [PREV Button ], and [NEXT Button ] to fast-forward or rewind, locate the starting point of the portion you want to keep. When you’ve determined the position, press the [REC Button]. confirm the starting point Rewind Continue to press Play Fast Forward Stop Continue to press 4. Search for the end point of the portion you want to keep. Using the [PLAY Button ], [STOP Button ], [PREV Button ], and [NEXT Button ] to fast-forward or rewind, locate the end point of the portion you want to keep. When you’ve determined the position, press the [REC Button]. You can return to step 3 by pressing the [FINDER Button]. This feature allows you to convert songs that have been recorded in WAV format to MP3 files. If you want to stop the conversion after it has started, press the [STOP Button ]. €¢ Do not turn off the power while the conversion is being carried out. €¢ If the card has insufficient free space, the message “SD Card Full” will appear, and this converting operation will not be possible. €¢ This feature cannot be used in ECO Mode. Select a WAV song from the <Finder Screen>. Use the [PLAY Button ] and [STOP Button WAV song, then press the [REC Button]. ] to select a Once it’s been converted to an MP3 file, the resulting song will be saved as a new song. As its name, the characters “-1” will be appended to the name of the source song. The source song will remain in its original state. For example, if the source song was named R09_0001. WAV, the MP3 conversion operation will create a new song named R09_0001-1. To select a subfolder, select the folder then press the [NEXT Button ]. [. . . ] 1 kHz, using internal microphone) Setting (Default value is bold) OFF (Normal) ON (ECO Mode) Changes the value ■ Precautions concerning use of ECO Mode Please note that ECO Mode imposes certain limitations regarding the functions that can be used and the parameters that can be set. Settings that can be used for recordings • Sampling Frequency: 44. 0 kHz • Recording Mode: WAV 16 bit Data that can be played back Only WAV files with a sampling frequency of 44. 0 kHz) Parameters for which settings can be changed • Ext Mic Type • Limiter/AGC • Low Cut Freq • Repeat • Rec Mode (WAV 16 bit) • Max File Size (2 GB) • Self Timer (OFF) • Metronome (OFF) • File Name (Name) • Play Mode (SEQUENTIAL) • Rec Monitor Sw • Preview Monitor • Brightness • Battery Type • Peak Hold (On) • Display Timer (5 sec) • Auto Power Off (30 min) • Rec/Peak LED (Normal) • Remote Control (Enable) Enter 3. [. . . ]