User manual ROLAND RD-700 MANUAL 2

[. . . ] Owner's Manual Thank you, and congratulations on your choice of the Roland Digital Piano RD-700. Before using this unit, carefully read the sections entitled: "IMPORTANT SAFETY INSTRUCTIONS" (p. 2), "USING THE UNIT SAFELY" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner's Manual should be read in its entirety. [. . . ] This permits playback of music data bearing the GS logo (GS music data). However, Roland's Sound Canvas Series (including the SC-8850 and SC-8820 models) feature a different sound module format and expanded tone map, so data created exclusively for the Sound Canvas Series may not play back properly on the RD-700. · You cannot enter GM mode using solely the RD-700 on its own. The RD-700 is switched to GM mode upon reception of a GM System On, GM2 System On, or GS Reset message, which has been supplied to it by being contained within the setup data placed at the beginning of a song that is to be played back. · You cannot switch to GM mode if the Edit screen's System settings, or the Rx GM System ON, Rx GM2 System ON, or GS Reset settings are set to "OFF. " For details, refer to "Switching Between Reception of GM/ GM2 System On and GS Reset" (p. 70). Changing the tone of a specific part 1. In the GM Mode screen, press the CURSOR buttons to move the cursor to the Part number. Press [DEC/NO] or [INC/YES] to select the Part whose Tone is to be changed. Press [DEC/NO] or [INC/YES] to select the tone. The specified Part is played using the selected Tone. Muting a Specific Part 1. In the GM Mode screen, use the CURSOR buttons to move the cursor to the marker for the Part to be muted. Press [DEC/NO] or [INC/YES] to select whether the mute is turned on or off. Display Meaning MIDI messages are received. The performance is played back according to the MIDI messages. This Part is muted. ­ Connecting MIDI Devices You can perform on the RD-700's keyboard even when Parts are muted. Exiting GM Mode 1. In the GM Mode screen, press [PIANO] or [SETUP]. The RD-700 goes out of GM mode and the Tone screen appears in the display. When the above step is carried out while playback of a GM Score is in progress, the RD-700 switches out of GM mode and the Tone screen is displayed while playback of the song continues. Playing Back GM Scores 1. Play back the GM Score with the external sequencer. 98 Troubleshooting If the RD-700 does not function in the way you expect, first check the following points. If this does not resolve the problem, consult your dealer or a nearby Roland Service Station. * If certain messages appear in the display during operation, please refer to "Error Messages/Other Messages" (p. Problem Check/Solution Are the Wave Expansion Boards correctly installed?· When selecting settings while using the EXPANSION [A] or [B] Tones or Rhythm Sets, confirm that the specified Wave Expansion Boards are properly installed in the specified slots (p. [. . . ] TEL: (04) 3360715 FRANCE Roland France SA 4, Rue Paul Henri SPAAK, Parc de l'Esplanade, F 77 462 St. Thibault, Lagny Cedex FRANCE TEL: 01 600 73 500 Parsons Music Ltd. 8th Floor, Railway Plaza, 39 Chatham Road South, T. S. T, Kowloon, HONG KONG TEL: 2333 1863 UKRAINE TIC-TAC Mira Str. Box 180 295400 Munkachevo, UKRAINE TEL: (03131) 414-40 BRAZIL Roland Brasil Ltda Rua San Jose, 780 Sala B Parque Industrial San Jose Cotia - Sao Paulo - SP, BRAZIL TEL: (011) 4615 5666 INDIA Rivera Digitec (India) Pvt. Ltd. 409, Nirman Kendra Mahalaxmi Flats Compound Off. [. . . ]